International Journals

• 2023

• Open-source culture platform for multi-cell type study with integrated pneumatic stimulation

  N. Cacocciola, S.L. Marasso, G. Canavese, M. Cocuzza, C.F. Pirri, F. Frascella

  Electronics, 2023, 12, 73, doi:10.3390/electronics12010073

• Organic bioelectronics development in Italy: a review

  M. Parmeggiani, A. Ballesio, S. Battistoni, R. Carcione, M. Cocuzza, P. D’Angelo, V. Erokhin, S.L. Marasso, G. Rinaldi, G. Tarabella, D. Vurro, C.F. Pirri

  Micromachines, 2023, 14, 60, doi:10.3390/mi14020460

• High-performance novel asymmetric MXene@CNT//N-doped CNT flexible hybrid device with large working voltage for energy storage

  J. Dangbegnon, N. Garino, M. Angelozzi, M. Laurenti, F. Seller, M. Serrapede, P. Zaccagnini, P. Moras, M. Cocuzza, T. Ouisse, H. Pazniak, J. Gonzalez-Julian, P.M. Sheverdyaeva, A. Di Vito, C.F. Pirri, A. Lamberti

  Journal of Energy Storage, 2023, 63, 106975, doi: 10.1016/j.est.2023.106975

• Pumpless Deterministic Lateral Displacement Separation Using Paper Capillary Wick

  B. Aghajanloo, F. Ejeian, F. Frascella, S.L. Marasso, M. Cocuzza, A. Fadaei Tehrani, M.H. Nasr-Esfahani, D. Inglis

  Lab On Chip, 2023, 23(8), pp. 2106–2112, doi:10.1039/D3LC00039G23(8)

• 2D Microfluidic devices for pore-scale phenomena investigation: a review

  A. Massimiani, F. Panini, S.L. Marasso, M. Cocuzza, M. Quaglio, C.F. Pirri, F. Verga, D. Viberti

  Water, 2023, 15, 1222, doi:10.3390/w15061222

• Immuno-sensing at ultra-low concentration of TG2 protein by organic electrochemical transistors

  V. Preziosi, M. Barra, V.R. Villella, E. Speranza, P. D’Angelo, S.L. Marasso, M. Cocuzza, A. Cassinese, S. Guido

  Biosensors, 2023, 13, 448, doi:10.3390/bios13040448

• Development of polymeric/MXenes composites towards 3D printable electronics

  A. Salas, H. Pazniak, J. Gonzalez-Julian, S. Bianco, J. Amici, T. Ouisse, I. Roppolo M. Cocuzza

  Composites Part B, 2023, 263, 110854, doi:10.1016/j.compositesb.2023.110854

• 3D-printed wideband reflectarray antennas with mechanical beam-steering

  A. Massaccesi, M. Beccaria, V. Bertana, S.L. Marasso, M. Cocuzza, G. Dassano and P. Pirinoli

  International Journal of Microwave and Wireless Technologies, 2023, 1–9, doi:10.1017/S1759078723000776

• Organic electrochemical transistor immuno-sensors for Spike protein early detection

  M. Barra, G. Tomaiuolo, V.R. Villella, S. Esposito, A. Liboà, P. D'Angelo, S.L. Marasso, M. Cocuzza, V. Bertana, E. Camilli, V. Preziosi

  Biosensors, 2023, 13(7), 739; doi:10.3390/bios13070739

• 3D-Printed Wideband Perforated Dielectric-Only Reflectarray in Ka-band

  A.Massaccesi, V. Bertana, M. Beccaria, S.L. Marasso, M. Cocuzza, G. Dassano and P. Pirinoli

  IEEE Transactions on Antennas and Propagation, 2023, pp. 1-1 , DOI:10.1109/TAP.2023.3304024

• 2022

• Organic electrochemical transistors as novel biosensing platforms to study the electrical response of whole blood and plasma

  V. Preziosi, M. Barra, G. Tomaiuolo, P. D’Angelo, S.L. Marasso, A. Verna, M. Cocuzza, A. Cassinese, S. Guido

  Journal of Materials Chemistry B, 2022, 10(1), pp. 87–95, doi:10.1039/D1TB01584B

• Flexible and reusable parylene C mask technology for applications in cascade impactor air quality monitoring systems

  L. Vigna, M. Gottschalk, N. Cacocciola, A. Verna, S.L. Marasso, S. Seeger, C.F. Pirri, M. Cocuzza

  Micro and Nano Engineering, 2022, 14, 100108, doi:10.1016/j.mne.2022.100108

• Design of a Portable Microfluidic Platform for EGOT-Based in Liquid Biosensing

  M. Segantini, M. Parmeggiani, A. Ballesio, G. Palmara, F. Frascella, S.L. Marasso, M. Cocuzza

  Sensors, 2022, 22, 969, doi:10.3390/s22030969

• Investigation and modeling of the electrical bias stress in Electrolyte-Gated Organic Transistors

  M. Segantini, A. Ballesio, G. Palmara, P. Zaccagnini, F. Frascella, G. Garzone, S. L. Marasso, M. Cocuzza, M. Parmeggiani

  Adv. Electron. Mater. 2022, 2101332, doi:10.1002/aelm.202101332

• A programmable culture platform for hydrostatic stimulation and in situ pH sensing of lung cancer cells with OECTs

  N. Cacocciola, M. Parmeggiani, S. Villata, D. Baruffaldi, S.L. Marasso, G. Canavese, M. Cocuzza, C.F. Pirri, F. Frascella

  Micro and Nano Engineering, 2022, 16, 100147, doi:10.1016/j.mne.2022.100147

• Single-step 3D Printing of Silver-patterned Polymeric Devices for Bacteria Proliferation Control

  G.A. González Flores, V. Bertana, A. Chiappone, I. Roppolo, L. Scaltrito, S. Ferrero, S.L. Marasso, M. Cocuzza, G. Massaglia, M. Quaglio, C.F.Pirri

  Macromolecular Materials and Engineering, 2022, 307(1), 2100596, doi:10.1002/mame.202100596

• PDAC-on-chip for modeling in vitro the stromal and pancreatic cancer cells crosstalk

  V. Sgarminato, S.L. Marasso, M. Cocuzza, G. Scordo, A. Ballesio, G. Ciardelli, C. Tonda Turo

  Biomaterials Science, 2022, 11, 208-224, doi:10.1039/D2BM00881E

• Aerosol Jet Printed Organic Memristive Microdevices based on a Chitosan:PANI Composite Conductive Channel

  R. Sajapin, D. Vurro, P. D'Angelo, G. Tarabella, S. Marasso, M. Cocuzza, M. Botti, M. Buttrini, A. Calderaro, T. Berzina, S. Iannotta

  ACS Applied Electronic Materials, 2022, 4, 12, 5875–5883, https://doi.org/10.1021/acsaelm.2c01047

• 2021

• The role of the internal capacitance in organic memristive device for neuromorphic and sensing applications

  S. Battistoni, M. Cocuzza, S.L. Marasso, A. Verna, V. Erokhin

  Advanced Electronic Materials, 2021, 2100494, doi: 10.1002/aelm.202100494

• The Effects Of Secondary Doping On Ink-Jet Printed PEDOT:PSS Gas Sensors For VOCs and NO2 Detection

  L. Vigna, A. Verna, S.L. Marasso, M. Sangermano, P. D’Angelo, F.C. Pirri, M. Cocuzza

  Sensors and Actuators B: Chemical, 345, 130381, 2021, doi: 10.1016/j.snb.2021.130381

• Layered Double Hydroxides Based Gas Sensors for VOCs Detection at Room Temperature

  L. Vigna, A. Nigro, A. Verna, I. Ferrari, S. Marasso, S. Bocchini, M. Fontana, A. Chiodoni, C. Pirri, M. Cocuzza

  ACS Omega, 2021, 6, 31, 20205-20217, doi:10.1021/acsomega.1c02038

• How underground systems can contribute to meet the challenges of energy transition

  Benetatos C., Bocchini S., Carpignano A., Chiodoni A., Cocuzza M., ..., Verga F., Viberti D.

  Geoingegneria Ambientale e Mineraria, 2021, 58(1-2), pp. 65–80, doi:10.19199/2021.2-3.1121-9041.065

• Focalization performance study of a novel bulk acoustic wave device

  F. Barbaresco, L. Racca, L. Spigarelli, M. Cocuzza, S.L. Marasso, C.F. Pirri, G. Canavese

  Nanomaterials 2021, 11, 2630, doi:10.3390/nano11102630

• Effect of volatile organic compounds adsorption on 3D printed PEGDA:PEDOT for chemical vapor sensing

  G. Scordo, V. Bertana, A. Ballesio, R. Carcione, S. L. Marasso, M. Cocuzza, C. F. Pirri, M. Manachino, M. Gomez Gomez, A. Vitale, A. Chiodoni, E. Tamburri, L. Scaltrito

  Nanomaterials, 2021, 11, 94. https://doi.org/10.3390/nano11010094

• Interfacing Aptamers, Nanoparticles and Graphene in a hierarchical structure for highly selective detection of biomolecules

  C. Peruzzi, S. Battistoni, D. Montesarchio, M. Cocuzza, S. Marasso, A. Verna, L. Pasquardini, R. Verucchi, L. Aversa, V. Erokhin, P. D'Angelo, S. Iannotta

  Scientific Reports, 2021, 11, 9380, doi:10.1038/s41598-021-88546-4

• 2020

• Photofabrication of polymeric biomicrofluidics: New insights into material selection

  E. Fantino, A. Chiadò, M. Quaglio, V. Vaghi, M. Cocuzza, S.L. Marasso, C. Potrich, L. Lunelli, C. Pederzolli, C.F. Pirri, R. Bongiovanni, A. Vitale

  Materials Science and Engineering: C, 2019, 110166, https://doi.org/10.1016/j.msec.2019.110166

• On the Interpretation of Hysteresis Loop for Electronic and Ionic Currents in Organic Memristive Devices

  S. Battistoni, A. Verna, S. L. Marasso, M. Cocuzza, V. Erokhin

  Phys. Status Solidi A 2020, 1900985, DOI: 10.1002/pssa.201900985

• 3D printed active objects based on the promising PEDOT:PSS resin: investigation of their

  V.Bertana, G. Scordo, M. Manachino, S. Romano, M. Gomez Gomez, S.L. Marasso, S. Ferrero, M. Cocuzza, C.F. Pirri, L. Scaltrito

  International Journal of Engineering Research and Technology (ISSN 0974-3154), 2020, Vol. 13, n. 3, pp. 462-469

• Electrospun nanofibers: from food to energy by engineered electrodes in Microbial Fuel Cells

  G. Massaglia, F. Frascella, A. Chiadò, A. Sacco, S. Marasso, M. Cocuzza, C.F. Pirri, M. Quaglio

  Nanomaterials 2020, 10(3), 523; doi:10.3390/nano10030523

• A Facile and Green Synthesis of a MoO2-Reduced Graphene Oxide Aerogel for Energy Storage Devices

  Mara Serrapede, Marco Fontana, Arnaud Gigot, Marco Armandi, Glenda Biasotto, Elena Tresso and Paola Rivolo

  Materials 2020, 13(3), 594

• Li+ Insertion in Nanostructured TiO2 for Energy Storage

  Mara Serrapede*, Umberto Savino, Micaela Castellino, Julia Amici, Silvia Bodoardo, Elena Tresso and Angelica Chiodoni

  Materials 2020, 13, 21

• Real-time and reversible light-actuated microfluidic channel squeezing in dye-doped PDMS

  A Angelini, U Agero, F Ferrarese Lupi, M Fretto, F Pirri, F Frascella

  Soft Matter, 2020, doi.org/10.1039/D0SM00217H

• A modular 3D printed lab-on-a-chip for early cancer detection

  A Chiadò, G Palmara, A Chiappone, C Tanzanu, CF Pirri, I Roppolo, F Frascella

  (2020) Lab Chip, 20, 665-674 Doi: 10.1039/C9LC01108K

• Come to light: Detailed analysis of thermally treated Phenyl modified Carbon Nitride Polymorphs for bright phosphors

  S Porcu, I Roppolo, M Salaun, G Sarais, S Barbarossa, MF Casula, CM Carbonaro, PC Ricci

  (2020) Applied Surface Science, Vol 504, 14330 DOI: 10.1016/j.apsusc.2019.144330

• Laser‐Triggered Writing and Biofunctionalization of Thiol‐Ene Networks

  A Romano, A Angelini, E Rossegger, G Palmara, M Castellino, F Frascella, A Chiappone, A Chiadò, M Sangermano, S Schlögl, I Roppolo

  (2020) Macromol. Rapid Commun. 2000084. Doi:10.1002/marc.202000084

• CO2 permeability control in 3D printed light responsive structures

  M Gillono, I Roppolo, F Frascella, L Scaltrito, CF Pirri, A Chiappone

  (2020) Applied Materials Today,18,100470, DOI: 10.1016/j.apmt.2019.100470

• PDMS-based microdevices for the capture of microRNA biomarkers

  L. Lunelli, F. Barbaresco, G. Scordo, C. Potrich, L. Vanzetti, S. Marasso, M. Cocuzza, C.F. Pirri, C. Perdezolli

  Applied Sciences, "PDMS-based microdevices for the capture of microRNA biomarkers", L. Lunelli, F. Barbaresco, G. Scordo, C. Potrich, L. Vanzetti, S. Marasso, M. Cocuzza, C.F. Pirri, C. Perdezolli, Applied Sciences, 2020, 10, 3867; doi:10.3390/app10113867

• Application of a Micro Free-Flow Electrophoresis 3D printed Lab-on-a-Chip for micro-nanoparticles analysis

  F. Barbaresco, M. Cocuzza, C.F. Pirri, S.L. Marasso

  Nanomaterials, 2020, 10, 1277; doi:10.3390/nano10071277

• The fabrication of Schottky photodiode by monolayer graphene direct-transfer-on-silicon

  Y. Wang, S. Yang, A. Ballesio, M. Parmeggiani, A. Verna, M. Cocuzza, C.F. Pirri and S.L. Marasso

  J. Appl. Phys. 128, 014501, (2020), https://doi.org/10.1063/5.0004242

• Rapid prototyping of 3D Organic Electrochemical Transistors by composite photocurable resin

  V. Bertana, G. Scordo, M. Parmeggiani, L. Scaltrito, S. Ferrero, M. Gomez Gomez, M. Cocuzza, D. Vurro, P. D’Angelo, S. Iannotta, C.F. Pirri, S.L. Marasso

  Scientific Reports, 10, 13335, 2020, doi:10.1038/s41598-020-70365-8

• Effects of noise sourcing on organic memristive devices

  S. Battistoni, R. Sajapin, V. Erokhin, A. Verna, M. Cocuzza, S.L. Marasso, S. Iannotta

  Chaos, Solitons & Fractals, 141, 2020, 110319, doi:10.1016/j.chaos.2020.110319

• 2019

• Simple PDMS microdevice for biomedical applications

  C. Potrich, L. Lunelli, M. Cocuzza, S.L. Marasso, C.F. Pirri, C. Pederzolli

  Talanta, Vol. 193, 2019, pp. 44-50, doi:10.1016/j.talanta.2018.09.080

• A fluid dynamics perspective on material selection in microbial fuel cell-based biosensors

  M. Quaglio, G. Massaglia, N. Vasile, V. Margaria, A. Chiodoni, G.P. Salvador, S.L. Marasso, M. Cocuzza, G. Saracco, C.F. Pirri

  International Journal of Hydrogen Energy, 2019, 44, pp. 4533-4542, DOI:10.1016/j.ijhydene.2018.11.087

• PEDOT:PSS morpho-structure and ion-to-electron transduction/amplification mechanisms in Organic Electrochemical Transistors

  P. D'Angelo, G. Tarabella, A. Romeo, S.L. Marasso, A. Verna, M. Cocuzza, C. Peruzzi, D. Vurro, S. Iannotta

  Materials, 2019, Vol. 12 (9), doi:10.3390/ma12010009

• 3D printing with the commercial UV-curable Standard Blend resin: optimized process parameters towards the fabrication of tiny functional parts

  V. Bertana, G. De Pasquale, S. Ferrero, L. Scaltrito, F. Catania, C. Nicosia, S.L. Marasso, M. Cocuzza, F. Perrucci

  Polymers, 2019, Vol. 11 (2), 292, doi:10.3390/polym11020292

• A novel hot embossing Graphene transfer process for flexible electronics

  A. Ballesio, M. Parmeggiani, A. Verna, F. Frascella, M. Cocuzza, C.F. Pirri, S.L. Marasso

  Microelectronic Engineering, 2019, 209, pp. 16-19, doi:10.1016/j.mee.2019.02.010

• A passive two-way microfluidic device for low volume blood-plasma separation

  Spigarelli, L., Bertana, V., Marchisio, D., Scaltrito, L., Ferrero, S., Cocuzza, M., Marasso, S.L., Canavese, G., Pirri, C.F.

  Microelectronic Engineering, 2019, 209, pp. 28-34, DOI: 10.1016/j.mee.2019.02.011

• Multifunctional Operation of an Organic Device with Three-Dimensional Architecture

  G. Tarabella, S.L. Marasso, V. Bertana, D. Vurro, P. D’Angelo, S. Iannotta and M. Cocuzza

  Materials, 2019, 12, 1357, doi:10.3390/ma12081357

• Lift-Off Assisted Patterning of Few Layers Graphene

  A. Verna, S.L. Marasso, P. Rivolo, M. Parmeggiani, M. Laurenti and M. Cocuzza

  Micromachines, 2019, 10(6), 426; doi:10.3390/mi10060426

• Scaling Organic Electrochemical Transistors Down to Nanosized Channels

  P. D'Angelo, S.L. Marasso, A. Verna, A. Ballesio, M. Parmeggiani, A. Sanginario, G. Tarabella, D. Demarchi, C.F. Pirri, M. Cocuzza, S. Iannotta

  Small, 2019, 1902332, DOI:10.1002/smll.201902332

• P3HT Processing Study for In-Liquid EGOFET Biosensors: Effects of the Solvent and the Surface

  M. Parmeggiani, A. Verna, A. Ballesio, M. Cocuzza, E. Piatti, V. Fra, C.F. Pirri, S.L. Marasso

  Sensors, 2019, Vol. 19, 4497, doi:10.3390/s19204497

• Synaptic response in organic electrochemical transistor gated by a graphene electrode

  S. Battistoni, C. Peruzzi, A. Verna, S.L. Marasso, M.Cocuzza, V. Erokhin, S. Iannotta

  Flexible and Printed Electronics, 2019, Vol. 4(4), 044002, doi:10.1088/2058-8585/ab4dce

• Generalized Langmuir kinetic equation for ions adsorption model applied to electrical double layer capacitor

  AL Alexe-Ionescu, P Zaccagnini, A Lamberti, CF Pirri, G Barbero

  (2019) Electrochimica Acta 323, 134700

• Frequency dependence of the phenomenological parameters describing adsorption processes in supercapacitors

  AL Alexe-Ionescu, P Zaccagnini, A Scalia, A Lamberti, E Tresso, CF Pirri, G Barbero

  (2019) Electrochimica Acta 316, 181-188

• PDMS/Polyimide Composite as an Elastomeric Substrate for Multifunctional Laser-Induced Graphene Electrodes

  M Parmeggiani, P Zaccagnini, S Stassi, M Fontana, S Bianco, C Nicosia, CF Pirri, A Lamberti

  (2019) ACS applied materials & interfaces 11 (36), 33221-33230

• Multifunctional flexible membranes based on reduced graphene oxide/tin dioxide nanocomposite and cellulose fibers

  N Garino, A Lamberti, S Stassi, M Castellino, M Fontana, I Roppolo, A Sacco, CF Pirri, A Chiappone

  (2019) Electrochimica Acta 306, 420-426

• Syngas production by electrocatalytic reduction of CO2 using Ag-decorated TiO2 nanotubes

  MA Farkhondehfal, S Hernández, M Rattalino, M Makkee, A Lamberti, A Chiodoni, K Bejtka, A Sacco, FC Pirri, N Russo

  (2019) International Journal of Hydrogen Energy, in press, https://doi.org/10.1016/j.ijhydene.2019.04.180

• Fiber-shaped asymmetric supercapacitor exploiting rGO/Fe2O3 aerogel and electrodeposited MnOx nanosheets on carbon fibers

  M Serrapede, A Rafique, M Fontana, A Zine, P Rivolo, S Bianco, L Chetibi, E Tresso, A Lamberti

  (2019) Carbon 144, 91-100

• Modeling of electrochemical capacitors under dynamical cycling

  P Zaccagnini, M Serrapede, A Lamberti, S Bianco, P Rivolo, E Tresso, CF Pirri, G Barbero, AL Alexe-Ionescu

  (2019) Electrochimica Acta 296, 709-718

• Dual-Cure Coatings: Spiroorthoesters as Volume-Controlling Additives in Thiol–Ene Reactions

  P Marx, A Romano, R Fischer, I Roppolo, M Sangermano, F Wiesbrock

  (2019) Macromolecular Materials And Engineering Vol .304 (4),1800627 DOI :10.1002/mame.201800627

• Directed Motion of Water Droplets on Multi-Gradient Photopolymer Surfaces

  E Rossegger, D Ennen, T Griesser, I Roppolo, S Schlögl

  (2019) Polymer Chemistry, Vol 10(15), pp 1882-1893 DOI : 10.1039/C9PY00123A

• Nanoparticle Reshaping and Ion Migration in Nanocomposite Ultrafast Ionic Actuators: The Converse Piezo–Electro–Kinetic Effect

  A Chiolerio, D Perrone, I Roppolo, G Rizza, F Risplendi, S Stassi, M Laurenti, K Rajan, A Chiappone, S Bocchini, G Cicero, P Pandolfi, K Bejtka, PE Coulon, C Ricciardi, CF Pirri

  (2019) Advanced Functional Materials, Vol 29, 1902941 DOI : 10.1002/adfm.201902941

• Thiol-yne chemistry for 3D printing: exploiting off stoichiometric route for selective functionalization of 3D objects

  I Roppolo, F Frascella, M Gastaldi, M Castellino, B Ciubini, C.Barolo, L Scaltrito, C Nicosia, M Zanetti, A Chiappone

  (2019) Polymer Chemistry DOI: 10.1039/C9PY00962K

• Gelatin Type A from Porcine Skin Used as Co-Initiator in a Radical Photo-Initiating System

  A Cosola, A Chiappone, C Martinengo, H Grützmacher, M Sangermano

  (2019) Polymers, 11, 1901, DOI:10.3390/polym11111901

• Study on the Printability through Digital Light Processing Technique of Ionic Liquids for CO2 Capture

  M Gillono, A Chiappone, L Mendola, M Gomez Gomez, L Scaltrito, CF Pirri, I Roppolo

  (2019) Polymers 11(12), 1932; Doi: 10.3390/polym11121932

• 3D Printing of Magnetoresponsive Polymeric Materials with Tunable Mechanical and Magnetic Properties by Digital Light Processing

  S Lantean, G Barrera, CF Pirri, P Tiberto, M Sangermano, I Roppolo, G Rizza

  (2019) Advanced Materials Technologies , Vol 4(11), 1900505. DOI: 10.1002/admt.201900505

• 3D-Printing of High-κ Thiol-Ene Resins with Spiro-Orthoesters as Anti-Shrinkage Additive

  P Marx, A Romano, I Roppolo, A Chemelli, I Muhlbache, W Kern, S Chaudhary, T Andritsch, M Sangermano, F Wiesbrock

  (2019) Macromolecular Materials and Engineering, Vol .304 (12), 1900515, DOI: 10.1002/mame.201900515

• A novel highly electrically conductive composite resin for stereolithography

  G Scordo, V Bertana, L Scaltrito, S Ferrero, M Cocuzza, S L Marasso, S Romano, R Sesana, F Catania, C F Pirri

  (2019) Materials Today Communications, Vol 19, 12-17, DOI: 10.1016/j.mtcomm.2018.12.017

• Numerical and experimental evaluation of SLA polymers adhesion for innovative bio-MEMS

  G De Pasquale, L Zappulla, L Scaltrito, V Bertana

  Materials Today: Proceedings 2019, Vol.7, 572-577, DOI: 10.1016/j.matpr.2018.12.010

• Medical and biomedical applications of 3D and 4D printed polymer nanocomposites (book chapter)

  V Bertana, F Catania, M Cocuzza, S Ferrero, L Scaltrito, C F Pirri

  Book: 3D and 4D Printing of Polymer Nanocomposite Materials: Processes, Applications, and Challenges (2019), 325-366

• Ionic modulation of electrical conductivity of ZnO due to ambient moisture

  G. Milano, M. Luebben, M. Laurenti, S. Porro, K. Bejtka, S. Bianco, U. Breuer, L. Boarino, I. Valov, C. Ricciardi

  (2019) Advanced Materials Interfaces, accepted for publication, DOI: 10.1002/admi.201900803

• Recent developments and perspectives for memristive devices based on metal oxide nanowires

  G. Milano, S. Porro, I. Valov, C. Ricciardi

  (2019) Advanced Electronic Materials 1800909 (1-34) in press. DOI: 10.1002/aelm.201800909

• Resistive switching in sub-micrometric ZnO polycrystalline films

  D. Conti, M. Laurenti, S. Porro, C. Giovinazzo, S. Bianco, V. Fra, A. Chiolerio, C.F. Pirri, G. Milano, C. Ricciardi

  (2019) Nanotechnology 30, 06570. DOI: 10.1088/1361-6528/aaf261

• 2018

• Unveiling the Fundamental Role of Temperature in RRAM Switching Mechanism by Multiscale Simulations

  Raffone, F., Cicero, G.

  (2018) ACS Applied Materials and Interfaces, 10 (8), pp. 7512-7519

• Unravelling Some of the Structure-Property Relationships in Graphene Oxide at Low Degree of Oxidation

  Savazzi, F., Risplendi, F., Mallia, G., Harrison, N.M., Cicero, G.

  (2018) Journal of Physical Chemistry Letters, 9 (7), pp. 1746-1749

• Reconfigurable elastomeric graded-index optical elements controlled by light

  Angelini, A., Pirani, F., Frascella, F., Descrovi, E.

  (2018) Light: Science and Applications, 7 (1), art. no. 7

• Evolution of nanomechanical properties and crystallinity of individual titanium dioxide nanotube resonators

  Stassi, S., Lamberti, A., Roppolo, I., Casu, A., Bianco, S., Scaiola, D., Falqui, A., Pirri, C.F., Ricciardi, C.

  (2018) Nanotechnology, 29 (8), art. no. 085702

• Crystallization of TiO2 nanotubes by in situ heating TEM

  Casu, A., Lamberti, A., Stassi, S., Falqui, A.

  (2018) Nanomaterials, 8 (1), art. no. 40

• Microcantilever resonator arrays for immunodetection of Β-lactoglobulin milk allergen

  Ricciardi, C., Santoro, K., Stassi, S., Lamberti, C., Giuffrida, M.G., Arlorio, M., Decastelli, L.

  (2018) Sensors and Actuators, B: Chemical, 254, pp. 613-617

• Unexpected behaviors in molecular transport through size-controlled nanochannels down to the ultra-nanoscale

  Bruno, G., Di Trani, N., Hood, R.L., Zabre, E., Filgueira, C.S., Canavese, G., Jain, P., Smith, Z., Demarchi, D., Hosali, S., Pimpinelli, A., Ferrari, M., Grattoni, A.

  (2018) Nature Communications, 9 (1), art. no. 1682

• Unravelling Resistive Switching Mechanism in ZnO NW Arrays: The Role of the Polycrystalline Base Layer

  Milano, G., Porro, S., Ali, M.Y., Bejtka, K., Bianco, S., Beccaria, F., Chiolerio, A., Pirri, C.F., Ricciardi, C.

  (2018) Journal of Physical Chemistry C, 122 (1), pp. 866-874

• TiO2 nanotube-based smart 3D electrodes by anodic oxidation of additively manufactured Ti6Al4V structures

  Lamberti, A., Manfredi, D., Calignano, F., Pirri, C.F.

  (2018) Materials Today Communications, 15, pp. 165-170

• ZnO- and TiO2-based nanostructures

  Lamberti, A.

  (2018) Nanomaterials, 8 (5), art. no. 325

• Flexible supercapacitor electrodes based on MoS2-intercalated rGO membranes on Ti mesh

  Lamberti, A.

  (2018) Materials Science in Semiconductor Processing, 73, pp. 106-110

• Performance comparison of hybrid resistive switching devices based on solution-processable nanocomposites

  Rajan, K., Roppolo, I., Bejtka, K., Chiappone, A., Bocchini, S., Perrone, D., Pirri, C.F., Ricciardi, C., Chiolerio, A.

  (2018) Applied Surface Science, 443, pp. 475-483

• Tuning ZnO Nanowire Dissolution by Electron Beam Modification of Surface Wetting Properties

  Milano, G., D'Ortenzi, L., Bejtka, K., Mandrile, L., Giovannozzi, A.M., Boarino, L., Pirri, C.F., Ricciardi, C., Porro, S.

  (2018) Journal of Physical Chemistry C, 122 (14), pp. 8011-8021

• 3D Printing/Interfacial Polymerization Coupling for the Fabrication of Conductive Hydrogel

  Fantino, E., Roppolo, I., Zhang, D., Xiao, J., Chiappone, A., Castellino, M., Guo, Q., Pirri, C.F., Yang, J.

  (2018) Macromolecular Materials and Engineering, 303 (4), art. no. 1700356

• Hydrogenated amorphous silicon coatings may modulate gingival cell response

  Mussano, F., Genova, T., Laurenti, M., Munaron, L., Pirri, C.F., Rivolo, P., Carossa, S., Mandracci, P.

  (2018) Applied Surface Science, 436, pp. 603-612

• All-in-One Cellulose Nanocrystals for 3D Printing of Nanocomposite Hydrogels

  Wang, J., Chiappone, A., Roppolo, I., Shao, F., Fantino, E., Lorusso, M., Rentsch, D., Dietliker, K., Pirri, C.F., Grützmacher, H.

  (2018) Angewandte Chemie - International Edition, 57 (9), pp. 2353-2356

• Integration of Organic Electrochemical Transistors and Immuno-Affinity Membranes for Label-Free Detection of Interleukin-6 at the Physiological Concentration Range through Antibody-Antigen Recognition

  D. Gentili, P. D’Angelo, F. Militano, R. Mazzei, T. Poerio, M. Brucale, G. Tarabella, S. Bonetti, S.L. Marasso, M. Cocuzza, L. Giorno, S. Iannotta and M. Cavallini

  Journal of Materials Chemistry B, Vol. 6(3), 2018, pp. 5400-5406, http://dx.doi.org/10.1039/C8TB01697F

• 3D-Printable Dielectric Transmitarray with Enhanced Bandwidth at Millimeter-Waves

  A. Massaccesi, P. Pirinoli, V. Bertana, G. Scordo, S.L. Marasso, M. Cocuzza, G. Dassano

  IEEE Access, Vol. 6, 2018, pp. 46407-46418, DOI: 10.1109/ACCESS.2018.2865353

• High-Performing and Stable Wearable Supercapacitor Exploiting rGO Aerogel Decorated with Copper and Molybdenum Sulfides on Carbon Fibers

  A. Pedico, A. Lamberti, A. Gigot, M. Fontana, F. Bella, P. Rivolo, M. Cocuzza and C.F. Pirri

  Applied Energy Materials, 2018, DOI:10.1021/acsaem.8b00904, in press

• A Flexible, Highly Sensitive, and Selective Chemiresistive Gas Sensor Obtained by In Situ Photopolymerization of an Acrylic Resin in the Presence of MWCNTs

  L. Vigna, A. Fasoli, M. Cocuzza, C.F. Pirri, L.D. Bozano and M. Sangermano

  Macromol. Mater. Eng., 2018, 1800453, DOI:10.1002/mame.201800453

• Portable high voltage powerpack by solid-state supercapacitor and dye-sensitized solar module integration

  A Scalia, A Varzi, A Lamberti, T Jacob, S Passerini

  (2018) Frontiers in Chemistry, 6, 443

• Multiscale measurements of piezoelectric response of hydrothermal converted BaTiO3 1D vertical arrays

  S Stassi, A Lamberti, M Lorenzoni, N Garino, G Canavese, S Bianco, K Bejtka, A Chiodoni, CF Pirri

  (2018) Applied Physics Letters 113 (25), 253102

• Graphene oxide finely tunes the bioactivity and drug delivery of mesoporous ZnO scaffolds

  M Laurenti, A Lamberti, GG Genchi, I Roppolo, G Canavese, C Vitale-Brovarone, G Ciofani, V Cauda

  (2018) ACS applied materials & interfaces 11 (1), 449-456

• In situ generation of silver nanoparticles in PVDF for the development of resistive switching devices

  A Chiappone, M Gillono, M Castellino, K Bejtka, K Rajan, I Roppolo, D Perrone, S Bocchini, C Ricciardi, CF Pirri, A Chiolerio

  (2018) Applied Surface Science, 455, pp. 418-424. DOI: 10.1016/j.apsusc.2018.06.001

• Stimuli-Responsive Thiol-Epoxy Networks with Photo-Switchable Bulk and Surface Properties

  A Romano, I Roppolo, M Giebler, K Dietliker, Š Mozina, P Šket, I Mühlbacher, S Schlögl, M Sangermano

  (2018) RSC Advances, Vol. 8, pp. 41904-41914, DOI : 10.1039/c8ra08937j

• Three-Dimensional Printed Photoluminescent Polymeric Waveguides

  F Frascella,G González, P Bosch, A Angelini,A Chiappone, M Sangermano, CF Pirri, I Roppolo

  (2018) ACS Applied Materials and Interfaces, 10 (45), pp. 39319-39326. DOI: 10.1021/acsami.8b16036

• Development of New Hybrid Acrylic/Epoxy DLP-3D Printable Materials

  A Lantean, I Roppolo, M Sangermano, CF Pirri, A Chiappone

  (2018) Inventions, 3(2), 29 DOI: 10.3390/inventions3020029

• A multi-level memristor based on atomic layer deposition of iron oxide

  S. Porro, K. Bejtka, A. Jasmin, M. Fontana, G. Milano, A. Chiolerio, C.F. Pirri, C. Ricciardi

  (2018) Nanotechnology 29, 495201. DOI: 10.1088/1361-6528/aae2ff

• Effects of single-pulse Al2O3 insertion in TiO2 oxide memristors by low temperature ALD

  C. Giovinazzo, C. Ricciardi, C.F. Pirri, A. Chiolerio, S. Porro

  (2018) Applied Physics A 124, 686. DOI: 10.1007/s00339-018-2112-5

• Graphene-based membrane technology: reaching out to the oil & gas industry

  C. Castro, M. Cocuzza, A. Lamberti, M. Laurenti, A. Pedico, F. Pirri, V. Rocca, E. Salina Borello, L. Scaltrito, C. Serazio, D. Viberti and F. Verga

  Geofluids, Volume 2018, Article ID 7026426, 13 pages, https://doi.org/10.1155/2018/7026426

• PLA conductive filament for 3D printed smart sensing applications

  S.L. Marasso, M. Cocuzza, V. Bertana, F. Perrucci, A. Tommasi, S. Ferrero, L. Scaltrito, C.F. Pirri

  Rapid Prototyping Journal, 2018, 24(4), pp. 739-743, DOI: 10.1108/RPJ-09-2016-0150

• Optimization of a suspended Two Photon Polymerized microfluidic filtration system

  C. Castro, M. Cocuzza, A. Lamberti, M. Laurenti, A. Pedico, F. Pirri, V. Rocca, E. Salina Borello, L. Scaltrito, C. Serazio, D. Viberti and F. Verga

  Microelectronic Engineering, 2018, 195, pp. 95-100, DOI: 10.1016/j.mee.2018.04.001

• 3D-printed microfluidics on thin Poly(methyl methacrylate) substrates for genetic applications

  V. Bertana, C. Potrich, G. Scordo, L. Scaltrito, S. Ferrero, A. Lamberti, F. Perrucci, C.F. Pirri, C. Pederzolli, M. Cocuzza, S.L Marasso

  Journal of Vacuum Science and Technology B, 36(1), Jan/Feb 2018, 01A106-1/7, DOI: 10.1116/1.5003203

• Electrical Conductivity Modulation of Crosslinked Composite Nanofibers Based on PEO and PEDOT:PSS

  G. Massaglia, A. Chiodoni, S. L. Marasso, C. F. Pirri, and M. Quaglio

  J. Nanomater., vol. 2018, pp. 1–7, 2018

• Experimental evaluation of mechanical properties repeatability of SLA polymers for labs-on-chip and bio-MEMS

  De Pasquale, G., Bertana, V., Scaltrito, L.

  (2018) Microsystem Technologies, pp. 1-11. Article in Press

• 2017

• New insights on laser-induced graphene electrodes for flexible supercapacitors: Tunable morphology and physical properties

  Lamberti, A., Perrucci, F., Caprioli, M., Serrapede, M., Fontana, M., Bianco, S., Ferrero, S., Tresso, E.

  (2017) Nanotechnology, 28 (17), art. no. 174002

• Multiple resistive switching in core-shell ZnO nanowires exhibiting tunable surface states

  Porro, S., Risplendi, F., Cicero, G., Bejtka, K., Milano, G., Rivolo, P., Jasmin, A., Chiolerio, A., Pirri, C.F., Ricciardi, C.

  (2017) Journal of Materials Chemistry C, 5 (40), pp. 10517-10523

• Structural, optical and electrical properties of Cu2ZnSnS4 films prepared from a non-toxic DMSO-based sol-gel and synthesized in low vacuum

  Orletskyi, I.G., Solovan, M.M., Brus, V.V., Pinna, F., Cicero, G., Maryanchuk, P.D., Maistruk, E.V., Ilashchuk, M.I., Boichuk, T.I., Tresso, E.

  (2017) Journal of Physics and Chemistry of Solids, 100, pp. 154-160

• Does platinum play a role in the resistance switching of ZnO nanowire-based devices?

  Raffone, F., Cicero, G.

  (2017) Solid State Ionics, 299, pp. 93-95

• Structural, optical, and electrical properties of Cu2SnS3 thin films produced by sol gel method

  Orletskii, I.G., Solovan, M.N., Pinna, F., Cicero, G., Mar’yanchuk, P.D., Maistruk, E.V., Tresso, E.

  (2017) Physics of the Solid State, 59 (4), pp. 801-807

• Nanostructured Bulk-Heterojunction Solar Cells Based on Amorphous Carbon

  Risplendi, F., Cicero, G., Grossman, J.C.

  (2017) ACS Energy Letters, 2 (4), pp. 882-888

• Effect of annealing and hydrogen plasma treatment on the luminescence and persistent photoconductivity of polycrystalline ZnO films

  Abdullin, Kh.A., Cicero, G., Gritsenko, L.V., Kumekov, S.E., Markhabaeva, A.A.

  (2017) Journal of Applied Physics, 121 (24), art. no. 245303

• Monitoring emulsion microstructure by using organic electrochemical transistors

  Preziosi, V., Barra, M., Perazzo, A., Tarabella, G., Romeo, A., Marasso, S.L., D'Angelo, P., Iannotta, S., Cassinese, A., Guido, S.

  (2017) Journal of Materials Chemistry C, 5 (8), pp. 2056-2065

• Laser-induced anisotropic wettability on azopolymeric micro-structures

  Pirani, F., Angelini, A., Ricciardi, S., Frascella, F., Descrovi, E.

  (2017) Applied Physics Letters, 110 (10), art. no. 101603

• Reversible Shaping of Microwells by Polarized Light Irradiation

  Pirani, F., Angelini, A., Frascella, F., Descrovi, E.

  (2017) International Journal of Polymer Science, 2017, art. no. 6812619

• 3D printable light-responsive polymers

  Roppolo, I., Chiappone, A., Angelini, A., Stassi, S., Frascella, F., Pirri, C.F., Ricciardi, C., Descrovi, E.

  (2017) Materials Horizons, 4 (3), pp. 396-401

• Interfacial Effects in Solid-Liquid Electrolytes for Improved Stability and Performance of Dye-Sensitized Solar Cells

  Bella, F., Popovic, J., Lamberti, A., Tresso, E., Gerbaldi, C., Maier, J.

  (2017) ACS Applied Materials and Interfaces, 9 (43), pp. 37797-37803

• Optical properties of thin Cu2ZnSnS4, films produced by RF magnetron sputtering

  Maistruk, E.V., Mar’yanchuk, P.D., Solovan, M.N., Pinna, F., Tresso, E.

  (2017) Optics and Spectroscopy, 123 (1), pp. 38-43

• Comparative spectroscopic approach for the dye loading optimization of sheet-like ZnO photoanodes for dye-sensitized solar cells

  Shahzad, N., Pugliese, D., Cauda, V., Shahzad, M.I., Shah, Z., Baig, M.A., Tresso, E.

  (2017) Journal of Photochemistry and Photobiology A: Chemistry, 337, pp. 192-197

• A flexible and portable powerpack by solid-state supercapacitor and dye-sensitized solar cell integration

  Scalia, A., Bella, F., Lamberti, A., Bianco, S., Gerbaldi, C., Tresso, E., Pirri, C.F.

  (2017) Journal of Power Sources, 359, pp. 311-321

• Experimental evidence of Fano resonances in nanomechanical resonators

  Stassi, S., Chiadò, A., Calafiore, G., Palmara, G., Cabrini, S., Ricciardi, C.

  (2017) Scientific Reports, 7 (1), art. no. 1065

• Polymeric 3D Printed Functional Microcantilevers for Biosensing Applications

  Stassi, S., Fantino, E., Calmo, R., Chiappone, A., Gillono, M., Scaiola, D., Pirri, C.F., Ricciardi, C., Chiadò, A., Roppolo, I.

  (2017) ACS Applied Materials and Interfaces, 9 (22), pp. 19193-19201

• Surface Engineering of Nanostructured ZnO Surfaces

  Laurenti, M., Stassi, S., Canavese, G., Cauda, V.

  (2017) Advanced Materials Interfaces, 4 (2), art. no. 1600758

• Functionalized ZnO nanowires for microcantilever biosensors with enhanced binding capability

  Stassi, S., Chiadò, A., Cauda, V., Palmara, G., Canavese, G., Laurenti, M., Ricciardi, C.

  (2017) Analytical and Bioanalytical Chemistry, 409 (10), pp. 2615-2625

• Lead-free piezoelectrics: V3+ to V5+ ion conversion promoting the performances of V-doped Zinc Oxide

  Laurenti, M., Castellino, M., Perrone, D., Asvarov, A., Canavese, G., Chiolerio, A.

  (2017) Scientific Reports, 7, art. no. 41957

• Graphene as Barrier to Prevent Volume Increment of Air Bubbles over Silicone Polymer in Aqueous Environment

  Bartali, R., Lamberti, A., Bianco, S., Pirri, C.F., Tripathi, M., Gottardi, G., Speranza, G., Iacob, E., Pugno, N., Laidani, N.

  (2017) Langmuir, 33 (45), pp. 12865-12872

• All-SPEEK flexible supercapacitor exploiting Laser-induced graphenization

  Lamberti, A., Serrapede, M., Ferraro, G., Fontana, M., Perrucci, F., Bianco, S., Chiolerio, A., Bocchini, S.

  (2017) 2D Materials, 4 (3), art. no. 035012

• Highly Uniform Anodically Deposited Film of MnO2 Nanoflakes on Carbon Fibers for Flexible and Wearable Fiber-Shaped Supercapacitors

  Rafique, A., Massa, A., Fontana, M., Bianco, S., Chiodoni, A., Pirri, C.F., Hernández, S., Lamberti, A.

  (2017) ACS Applied Materials and Interfaces, 9 (34), pp. 28386-28393

• Flexible wire-based electrodes exploiting carbon/ZnO nanocomposite for wearable supercapacitors

  Rafique, A., Bianco, S., Fontana, M., Pirri, C.F., Lamberti, A.

  (2017) Ionics, 23 (7), pp. 1839-1847

• Fabrication of knn thin-films via a spin coating technique

  Rani, R., Sharma, S., Quaglio, M., Hernandez, S., Bianco, S., Chiodoni, A., Pirri, C.F.

  (2017) Smart Materials for Smart Living, pp. 277-289

• Defining the role of nanonetting in the electrical behaviour of composite nanofiber/nets

  Massaglia, G., Chiodoni, A., Salvador, G.P., Delmondo, L., Muñoz-Tabares, J.A., Bocchini, S., Sacco, A., Bianco, S., Saracco, G., Quaglio, M.

  (2017) RSC Advances, 7 (62), pp. 38812-38818

• UV-Printable and Flexible Humidity Sensors Based on Conducting/Insulating Semi-Interpenetrated Polymer Networks

  Razza, N., Blanchet, B., Lamberti, A., Pirri, F.C., Tulliani, J.-M., Bozano, L.D., Sangermano, M.

  (2017) Macromolecular Materials and Engineering, 302 (10), art. no. 1700161

• Anodically-grown TiO2 nanotubes: Effect of the crystallization on the catalytic activity toward the oxygen reduction reaction

  Sacco, A., Garino, N., Lamberti, A., Pirri, C.F., Quaglio, M.

  (2017) Applied Surface Science, 412, pp. 447-454

• Unveiling the controversial mechanism of reversible Na storage in TiO2 nanotube arrays: Amorphous versus anatase TiO2

  Bella, F., Muñoz-García, A.B., Meligrana, G., Lamberti, A., Destro, M., Pavone, M., Gerbaldi, C.

  (2017) Nano Research, 10 (8), pp. 2891-2903

• Electro-oxidation of phenol over electrodeposited MnOx nanostructures and the role of a TiO2 nanotubes interlayer

  Massa, A., Hernández, S., Lamberti, A., Galletti, C., Russo, N., Fino, D.

  (2017) Applied Catalysis B: Environmental, 203, pp. 270-281

• Graphene/ruthenium active species aerogel as electrode for supercapacitor applications

  Gigot, A., Fontana, M., Pirri, C.F., Rivolo, P.

  (2017) Materials, 11 (1), art. no. 57

• Resistive switching and impedance properties of soft nanocomposites based on Ag nanoparticles

  Chiolerio, A., Roppolo, I., Perrone, D., Sacco, A., Rajan, K., Chiappone, A., Bocchini, S., Bejtka, K., Ricciardi, C., Pirri, C.F.

  (2017) Applied Surface Science, 424, pp. 352-358

• Study of graphene oxide-based 3D printable composites: Effect of the in situ reduction

  Chiappone, A., Roppolo, I., Naretto, E., Fantino, E., Calignano, F., Sangermano, M., Pirri, F.

  (2017) Composites Part B: Engineering, 124, pp. 9-15

• Resistive Switching in Polymer Nanocomposites by Matrix-Controlled in Situ Nanoparticles Generation

  Roppolo, I., Castellino, M., Bejtka, K., Rizza, G., Perrone, D., Coulon, P.-E., Chiappone, A., Rajan, K., Bocchini, S., Ricciardi, C., Pirri, C.F., Chiolerio, A.

  (2017) Journal of Physical Chemistry C, 121 (26), pp. 14285-14295

• Zinc Oxide Thin Films for Memristive Devices: A Review

  Laurenti, M., Porro, S., Pirri, C.F., Ricciardi, C., Chiolerio, A.

  (2017) Critical Reviews in Solid State and Materials Sciences, 42 (2), pp. 153-172

• Spin-coated silver nanocomposite resistive switching devices

  Rajan, K., Bocchini, S., Chiappone, A., Roppolo, I., Perrone, D., Bejtka, K., Ricciardi, C., Pirri, C.F., Chiolerio, A.

  (2017) Microelectronic Engineering, 168, pp. 27-31

• Photolatent base catalyzed Michael-addition and concomitant in situ graphene oxide reduction to obtain electrically and thermally conductive UV-cured composite

  Gigot, A., Morra, A., Castellino, M., Pirri, C.F., Mittal, V., Dietliker, K., Sangermano, M.

  (2017) Polymer (United Kingdom), 108, pp. 251-256

• Highly performing ionic liquid enriched hybrid RSDs

  Rajan, K., Bejtka, K., Bocchini, S., Perrone, D., Chiappone, A., Roppolo, I., Pirri, C.F., Ricciardi, C., Chiolerio, A.

  (2017) Journal of Materials Chemistry C, 5 (25), pp. 6144-6155

• Back plate electroplating for high aspect ratio processes

  S.L. Marasso, S. Benetto, I. Para, C. Ottone, D. Mombello, D. Perrone, S. Ferrero, L. Scaltrito, Diego Pugliese, M. Cocuzza, C.F. Pirri

  Microelectronics International, 2017, Vol. 34(2), pp. 69-74, doi:10.1108/MI-03-2016-0024

• Modeling, Fabrication and Testing of a Customizable Micromachined Hotplate for Sensor Applications

  A. Tommasi, M. Cocuzza, D. Perrone, C. F. Pirri, R. Mosca, M. Villani, N. Delmonte, A. Zappettini, D. Calestani and S. L. Marasso

  Sensors, 2017, 17(1), 62, doi:10.3390/s17010062

• Optimized design and fabrication of a microfluidic platform to study single cells and multicellular aggregates in 3D

  S.L. Marasso, A. Puliafito, D. Mombello, S. Benetto, L. Primo, F. Bussolino, C.F. Pirri, M. Cocuzza

  Microfluidics and Nanofluidics, February 2017, 21:29, DOI: 10.1007/s10404-017-1872-0

• miRNA purification with an optimized PDMS microdevice: toward the direct purification of low abundant circulating biomarkers

  G. C Santini, C. Potrich, L. Lunelli, L. Vanzetti, S. L. Marasso, M. Cocuzza, C. F. Pirri, C. Pederzolli

  Biophysical Chemistry, Biophysical Chemistry, 2017, 229, pp. 142-150, doi: 10.1016/j.bpc.2017.04.009

• Monitoring the adaptive cell response to hyperosmotic stress by organic devices

  P. D'Angelo, G. Tarabella, A. Romeo, A. Giodice, S. L. Marasso, M. Cocuzza, F. Ravanetti, A. Cacchioli, P. G. Petronini, S. Iannotta

  MRS Communications, 2017, pp. 1-7, doi:10.1557/mrc.2017.29

• Innovative technologies for offshore platforms safety and environmental monitoring

  M. Cocuzza, L. Scaltrito, S. Ferrero, S.L. Marasso, D. Perrone, C.F. Pirri

  Geoingegneria Ambientale e Mineraria (GEAM), 2017, 152 (3), pp. 41-50

• Behaviour of the Intraocular Pressure during Manual and Vented Gas Forced Infusion in a Simulated Pars Plana Vitrectomy

  M. Dal Vecchio, A. M. Fea, R. Spinetta, S.L. Marasso, M. Cocuzza, L. Scaltrito, G. Canavese

  Geoingegneria Ambientale e Mineraria (GEAM), 2017, 152 (3), pp. 41-50

• Wafer level integration of 3D heat sinks in power ICs

  C. Castro, M. Cocuzza, A. Lamberti, M. Laurenti, A. Pedico, F. Pirri, V. Rocca, E. Salina Borello, L. Scaltrito, C. Serazio, D. Viberti and F. Verga

  IEEE Transactions on Electron Devices, 2017, 64 (10), 4226-4232, doi:10.1109/TED.2017.2732733

• The virtuous CO2 circle or the three C’s: capture, cache, convert

  S. Bocchini, C. Castro, M. Cocuzza, S. Ferrero, G. Latini, A. Martis, C. F. Pirri, L. Scaltrito, V. Rocca, F. Verga, D. Viberti

  Journal of Nanomaterials, 2017, Article ID 6594151, doi:10.1155/2017/6594151

• High-Throughput Characterization of Microcantilever Resonator Arrays for Low-Concentration Detection of Small Molecules

  Ferrante, I., Ciprianetti, N., Stassi, S., Santoro, K., Ferrero, S., Scaltrito, L., Ricciardi, C.

  (2017) Journal of Microelectromechanical Systems, 26 (1), art. no. 7786828, pp. 246-254

• Development of 3D printable formulations containing CNT with enhanced electrical properties

  Gonzalez, G., Chiappone, A., Roppolo, I., Fantino, E., Bertana, V., Perrucci, F., Scaltrito, L., Pirri, F., Sangermano, M.

  (2017) Polymer (United Kingdom), 109, pp. 246-253

• A new cooling technique for targets operating under very intense beams

  Iazzi, F., Ferrero, S., Introzzi, R., Pinna, F., Scaltrito, L., Calvo, D., Fisichella, M., Agodi, C., Cappuzzello, F., Carbone, D., Cavallaro, M.

  (2017) WIT Transactions on Engineering Sciences, 116, pp. 61-70

• 2016

• Barrier height evolution in a non-uniform interface of Ti or Mo Schottky diodes based on 4H-SiC

  Gharbi, R., Shili, K., Ben Karoui, M., Fathallah, M., Ferrero, S.

  (2016) International Journal of Electronics Letters, 4 (3), pp. 367-375

• In situ MoS2 Decoration of Laser-Induced Graphene as Flexible Supercapacitor Electrodes

  Clerici, F., Fontana, M., Bianco, S., Serrapede, M., Perrucci, F., Ferrero, S., Tresso, E., Lamberti, A.

  (2016) ACS Applied Materials and Interfaces, 8 (16), pp. 10459-10465

• A New Theoretical Insight into ZnO NWs Memristive Behavior

  Raffone, F., Risplendi, F., Cicero, G.

  (2016) Nano Letters, 16 (4), pp. 2543-2547

• NO2 Gas Sensing Mechanism of ZnO Thin-Film Transducers: Physical Experiment and Theoretical Correlation Study

  Tamvakos, A., Korir, K., Tamvakos, D., Calestani, D., Cicero, G., Pullini, D.

  (2016) ACS Sensors, 1 (4), pp. 406-412

• MoS2 Enhanced T-Phase Stabilization and Tunability Through Alloying

  Raffone, F., Ataca, C., Grossman, J.C., Cicero, G.

  (2016) Journal of Physical Chemistry Letters, 7 (13), pp. 2304-2309

• Tailoring oxygen vacancies at ZnO(1 1 - 00) surface: An ab initio study

  Korir, K.K., Catellani, A., Cicero, G.

  (2016) Journal of Applied Physics, 120 (12), art. no. 125301

• A multipurpose CMOS platform for nanosensing

  Bonanno, A., Sanginario, A., Marasso, S.L., Miccoli, B., Bejtka, K., Benetto, S., Demarchi, D.

  (2016) Sensors (Switzerland), 16 (12), art. no. 2034

• How Micropatterning and Surface Functionalization Affect the Wetting Behavior of ZnO Nanostructured Surfaces

  Laurenti, M., Verna, A., Fontana, M., Stassi, S., Canavese, G., Marasso, S.L., Cauda, V.

  (2016) Advanced Materials Interfaces, 3 (13), art. no. 1600110

• Bloch surface wave-coupled emission at ultraviolet wavelengths

  Badugu, R., Mao, J., Blair, S., Zhang, D., Descrovi, E., Angelini, A., Huo, Y., Lakowicz, J.R.

  (2016) Journal of Physical Chemistry C, 120 (50), pp. 28727-28734

• Light-Driven Reversible Shaping of Individual Azopolymeric Micro-Pillars

  Pirani, F., Angelini, A., Frascella, F., Rizzo, R., Ricciardi, S., Descrovi, E.

  (2016) Scientific Reports, 6, art. no. 31702

• SERS-active Ag nanoparticles on porous silicon and PDMS substrates: A comparative study of uniformity and Raman efficiency

  Novara, C., Dalla Marta, S., Virga, A., Lamberti, A., Angelini, A., Chiadò, A., Rivolo, P., Geobaldo, F., Sergo, V., Bonifacio, A., Giorgis, F.

  (2016) Journal of Physical Chemistry C, 120 (30), pp. 16946-16953

• Surface-relief formation in azo-polyelectrolyte layers with a protective polymer coating

  Frascella, F., Angelini, A., Ricciardi, S., Pirri, F., Descrovi, E.

  (2016) Optical Materials Express, 6 (2), pp. 444-450

• Optical and structural properties of amorphous silicon-nitrides and silicon-oxycarbides: Application of multilayer structures for the coupling of Bloch Surface Waves

  Mandracci, P., Frascella, F., Rizzo, R., Virga, A., Rivolo, P., Descrovi, E., Giorgis, F.

  (2016) Journal of Non-Crystalline Solids, 453, pp. 113-117

• Hydrogel-Terminated Photonic Crystal for Label-Free Detection of Angiopoietin-1

  Frascella, F., Petri, C., Ricciardi, S., Napione, L., Munzert, P., Jonas, U., Dostalek, J., Bussolino, F., Pirri, C.F., Descrovi, E.

  (2016) Journal of Lightwave Technology, 34 (15), art. no. 7409927, pp. 3641-3645

• Optimization and characterization of a homogeneous carboxylic surface functionalization for silicon-based biosensing

  Chiadò, A., Palmara, G., Ricciardi, S., Frascella, F., Castellino, M., Tortello, M., Ricciardi, C., Rivolo, P.

  (2016) Colloids and Surfaces B: Biointerfaces, 143, pp. 252-259

• Smart detection of microRNAs through fluorescence enhancement on a photonic crystal

  Pasquardini, L., Potrich, C., Vaghi, V., Lunelli, L., Frascella, F., Descrovi, E., Pirri, C.F., Pederzolli, C.

  (2016) Talanta, 150, pp. 699-704

• Mixed 1T-2H Phase MoS2/Reduced Graphene Oxide as Active Electrode for Enhanced Supercapacitive Performance

  Gigot, A., Fontana, M., Serrapede, M., Castellino, M., Bianco, S., Armandi, M., Bonelli, B., Pirri, C.F., Tresso, E., Rivolo, P.

  (2016) ACS Applied Materials and Interfaces, 8 (48), pp. 32842-32852

• Fabrication and investigation of photosensitive MoOx/n-CdTe heterojunctions

  Solovan, M.M., Gavaleshko, N.M., Brus, V.V., Mostovyi, A.I., Maryanchuk, P.D., Tresso, E.

  (2016) Semiconductor Science and Technology, 31 (10), art. no. 105006

• Self-assembly of graphene aerogel on copper wire for wearable fiber-shaped supercapacitors

  Lamberti, A., Gigot, A., Bianco, S., Fontana, M., Castellino, M., Tresso, E., Pirri, C.F.

  (2016) Carbon, 105, pp. 649-654

• Flexible solid-state CuxO-based pseudo-supercapacitor by thermal oxidation of copper foils

  Lamberti, A., Fontana, M., Bianco, S., Tresso, E.

  (2016) International Journal of Hydrogen Energy, 41 (27), pp. 11700-11708

• Real time monitoring of ultrafast sensitization for Dye-Sensitized Solar Cell photoanodes

  Shahzad, N., Lamberti, A., Pugliese, D., Shahzad, M.I., Tresso, E.

  (2016) Solar Energy, 130, pp. 74-80

• Molybdenum oxide thin films in CdTe-based electronic and optoelectronic devices

  Solovan, M.M., Brus, V.V., Mostovyi, A.I., Maryanchuk, P.D., Tresso, E., Gavaleshko, N.M.

  2016) Physica Status Solidi - Rapid Research Letters, 10 (4), pp. 346-349

• Dynamical analysis of microbial fuel cells based on planar and 3D-packed anodes

  Tommasi, T., Sacco, A., Armato, C., Hidalgo, D., Millone, L., Sanginario, A., Tresso, E., Schilirò, T., Pirri, C.F.

  (2016) Chemical Engineering Journal, 288, pp. 38-49

• Toward Totally Flexible Dye-Sensitized Solar Cells Based on Titanium Grids and Polymeric Electrolyte

  Gerosa, M., Sacco, A., Scalia, A., Bella, F., Chiodoni, A., Quaglio, M., Tresso, E., Bianco, S.

  (2016) IEEE Journal of Photovoltaics, 6 (2), art. no. 7384432, pp. 498-505

• Floating, Flexible Polymeric Dye-Sensitized Solar-Cell Architecture: The Way of Near-Future Photovoltaics

  Bella, F., Lamberti, A., Bianco, S., Tresso, E., Gerbaldi, C., Pirri, C.F.

  (2016) Advanced Materials Technologies, 1 (2), art. no. 1600002

• A porous nanobranched structure: An effective way to improve piezoelectricity in sputtered ZnO thin films

  Laurenti, M., Canavese, G., Stassi, S., Fontana, M., Castellino, M., Pirri, C.F., Cauda, V.

  (2016) RSC Advances, 6 (80), pp. 76996-77004

• The active modulation of drug release by an ionic field effect transistor for an ultra-low power implantable nanofluidic system

  Bruno, G., Canavese, G., Liu, X., Filgueira, C.S., Sacco, A., Demarchi, D., Ferrari, M., Grattoni, A.

  (2016) Nanoscale, 8 (44), pp. 18718-18725

• Large area fabrication of self-standing nanoporous graphene-on-PMMA substrate

  Clochard, M.-C., Melilli, G., Rizza, G., Madon, B., Alves, M., Wegrowe, J.-E., Toimil-Molares, M.-E., Christian, M., Ortolani, L., Rizzoli, R., Morandi, V., Palermo, V., Bianco, S., Pirri, F., Sangermano, M.

  (2016) Materials Letters, 184, pp. 47-51

• Toward Plastic Smart Windows: Optimization of Indium Tin Oxide Electrodes for the Synthesis of Electrochromic Devices on Polycarbonate Substrates

  Laurenti, M., Bianco, S., Castellino, M., Garino, N., Virga, A., Pirri, C.F., Mandracci, P.

  (2016) ACS Applied Materials and Interfaces, 8 (12), pp. 8032-8042

• Nanostructural evolution of one-dimensional BaTiO3 structures by hydrothermal conversion of vertically aligned TiO2 nanotubes

  Muñoz-Tabares, J.A., Bejtka, K., Lamberti, A., Garino, N., Bianco, S., Quaglio, M., Pirri, C.F., Chiodoni, A.

  (2016) Nanoscale, 8 (12), pp. 6866-6876

• Dye-sensitized solar cell for a solar concentrator system

  Sacco, A., Gerosa, M., Bianco, S., Mercatelli, L., Fontana, R., Pezzati, L., Quaglio, M., Pirri, C.F., Tucci, A.O.M.

  (2016) Solar Energy, 125, pp. 307-313

• Memristive behaviour in poly-acrylic acid coated TiO2 nanotube arrays

  Conti, D., Lamberti, A., Porro, S., Rivolo, P., Chiolerio, A., Pirri, C.F., Ricciardi, C.

  (2016) Nanotechnology, 27 (48), art. no. 485208

• TiO2 nanotube array as biocompatible electrode in view of implantable supercapacitors

  Lamberti, A., Pirri, C.F.

  (2016) Journal of Energy Storage, 8, pp. 193-197

• Immobilization of Oligonucleotides on Metal-Dielectric Nanostructures for miRNA Detection

  Chiadò, A., Novara, C., Lamberti, A., Geobaldo, F., Giorgis, F., Rivolo, P.

  (2016) Analytical Chemistry, 88 (19), pp. 9554-9563

• Surface-enhanced Raman spectroscopy on porous silicon membranes decorated with Ag nanoparticles integrated in elastomeric microfluidic chips

  Novara, C., Lamberti, A., Chiadò, A., Virga, A., Rivolo, P., Geobaldo, F., Giorgis, F.

  (2016) RSC Advances, 6 (26), pp. 21865-21870

• In situ thermal generation of silver nanoparticles in 3D printed polymeric structures

  Fantino, E., Chiappone, A., Calignano, F., Fontana, M., Pirri, F., Roppolo, I.

  (2016) Materials, 9 (7), art. no. 589

• 3D Printed PEG-Based Hybrid Nanocomposites Obtained by Sol-Gel Technique

  Chiappone, A., Fantino, E., Roppolo, I., Lorusso, M., Manfredi, D., Fino, P., Pirri, C.F., Calignano, F.

  (2016) ACS Applied Materials and Interfaces, 8 (8), pp. 5627-5633

• Resistive hysteresis in flexible nanocomposites and colloidal suspensions: Interfacial coupling mechanism unveiled

  Chiolerio, A., Roppolo, I., Bejtka, K., Asvarov, A., Pirri, C.F.

  (2016) RSC Advances, 6 (61), pp. 56661-56667

• Hydrophobic Scratch Resistant UV-Cured Epoxy Coating

  Sangermano, M., Perrot, A., Gigot, A., Rivolo, P., Pirri, F., Messori, M.

  (2016) Macromolecular Materials and Engineering, 301 (1), pp. 93-98

• 3D Printing of Conductive Complex Structures with in Situ Generation of Silver Nanoparticles

  Fantino, E., Chiappone, A., Roppolo, I., Manfredi, D., Bongiovanni, R., Pirri, C.F., Calignano, F.

  (2016) Advanced Materials, 28 (19), pp. 3712-3717

• Low-temperature atomic layer deposition of TiO2thin layers for the processing of memristive devices

  Porro, S., Jasmin, A., Bejtka, K., Conti, D., Perrone, D., Guastella, S., Pirri, C.F., Chiolerio, A., Ricciardi, C.

  (2016) Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, 34 (1), art. no. 01A147

• Ionic liquid-enhanced soft resistive switching devices

  Rajan, K., Chiappone, A., Perrone, D., Bocchini, S., Roppolo, I., Bejtka, K., Castellino, M., Pirri, C.F., Ricciardi, C., Chiolerio, A.

  (2016) RSC Advances, 6 (96), pp. 94128-94138

• On-chip purification and detection of hepatitis C virus RNA from human plasma

  V. Vaghi, C. Potrich, L. Pasquardini, L. Lunelli, L. Vanzetti, E. Ebranati, A. Lai, G. Zehender, D. Mombello, M. Cocuzza, C.F. Pirri, C. Pederzolli

  Biophys. Chem., Jan. 2016, 208, pp.54-61, http://dx.doi.org/10.1016/j.bpc.2015.06.005

• A novel graphene based nanocomposite for application in 3D flexible micro- supercapacitors

  S.L. Marasso, P. Rivolo, R. Giardi, D. Mombello, A. Gigot, M. Serrapede, S. Benetto, A. Enrico, M. Cocuzza, E. Tresso, C.F. Pirri

  Materials Research Express, 2016, Vol. 3(6), doi:10.1088/2053-1591/3/6/065001

• A new method to integrate ZnO nano-tetrapods on MEMS micro-hotplates for large scale gas sensor production

  S.L. Marasso, A. Tommasi, D. Perrone, M. Cocuzza, R. Mosca, M Villani, A Zappettini and D. Calestani

  Nanotechnology, 2016, Vol. 27(38), 385503, doi:10.1088/0957-4484/27/38/385503

• Biorecognition in organic field effect transistors biosensors: the role of the density of states of the organic semiconductor

  M. Berto, S. Casalini, M. Di Lauro, S. Marasso, M. Cocuzza, D. Perrone, M. Pinti, A. Cossarizza, C.F. Pirri, D. Simon, M. Berggren, F. Zerbetto, C. Bortolotti, F. Biscarini

  Analytical Chemistry, 2016, 88 (24), pp. 12330–12338, doi:10.1021/acs.analchem.6b03522

• Impedance hyperbolicity in inkjet‐printed graphene nanocomposites: tunable capacitors for advanced devices

  A. Chiolerio, S. Porro, S. Bocchini

  (2016) Advanced Electronic Materials, 2, 1500312. DOI: 10.1002/aelm.201500312

• A highly stretchable supercapacitor using laser-induced graphene electrodes onto elastomeric substrate

  Lamberti, A., Clerici, F., Fontana, M., Scaltrito, L.

  (2016) Advanced Energy Materials, 6 (10), art. no. 1600050

• Production of a thin diamond target by laser for HESR at FAIR

  Balestra, F., Ferrero, S., Introzzi, R., Pirri, F., Scaltrito, L., Younis, H.

  (2016) Journal of Physics: Conference Series, 713 (1), art. no. 012003

• 2015

• Production of a thin diamond target by LASER for nuclear reactions inside storage rings

  Younis, H., Balestra, F., Iazzi, F., Introzzi, R., Lavagno, A., Pirri F, F., Ferrero, S., Scaltrito, L., Ajaz, M.

  (2015) Journal of Radioanalytical and Nuclear Chemistry, 305 (3), pp. 737-742

• Origin of the accumulation layer at the InN/a-In2O3 interface

  Aliano, A., Cicero, G., Catellani, A.

  (2015) ACS Applied Materials and Interfaces, 7 (9), pp. 5415-5419

• Co-Adsorbent Effect on the Sensitization of TiO2 and ZnO Surfaces: A Theoretical Study

  Risplendi, F., Cicero, G.

  (2015) Journal of Physical Chemistry C, 119 (49), pp. 27348-27353

• Resonating Behaviour of Nanomachined Holed Microcantilevers

  Canavese, G., Ricci, A., Gazzadi, G.C., Ferrante, I., Mura, A., Marasso, S.L., Ricciardi, C.

  (2015) Scientific Reports, 5, art. no. 17837

• Resonant evanescent complex fields on dielectric multilayers

  Angelini, A.

  (2015) Optics Letters, 40 (24), pp. 5746-5749

• Optofluidic chip for surface wave-based fluorescence sensing

  Ricciardi, S., Frascella, F., Angelini, A., Lamberti, A., Munzert, P., Boarino, L., Rizzo, R., Tommasi, A., Descrovi, E.

  (2015) Sensors and Actuators, B: Chemical, 215, pp. 225-230

• Easy Tuning of Surface and Optical Properties of PDMS Decorated by Ag Nanoparticles

  Lamberti, A., Virga, A., Rivolo, P., Angelini, A., Giorgis, F.

  (2015) Journal of Physical Chemistry B, 119 (25), pp. 8194-8200

• A flow-through holed PDMS membrane as a reusable microarray spotter for biomedical assays

  Lamberti, A., Angelini, A., Ricciardi, S., Frascella, F.

  (2015) Lab on a Chip, 15 (1), pp. 67-71

• Enhanced fluorescence detection of miRNA-16 on a photonic crystal

  Frascella, F., Ricciardi, S., Pasquardini, L., Potrich, C., Angelini, A., Chiadò, A., Pederzolli, C., De Leo, N., Rivolo, P., Pirri, C.F., Descrovi, E.

  (2015) Analyst, 140 (16), pp. 5459-5463

• Angularly resolved ellipsometric optical biosensing by means of Bloch surface waves

  Sinibaldi, A., Anopchenko, A., Rizzo, R., Danz, N., Munzert, P., Rivolo, P., Frascella, F., Ricciardi, S., Michelotti, F.

  (2015) Analytical and Bioanalytical Chemistry, 407 (14), pp. 3965-3974

• In-situ spectroscopic analyses of the dye uptake on ZnO and TiO2 photoanodes for Dye-Sensitized Solar Cells

  Shahzad, N., Pugliese, D., Shahzad, M.I., Tresso, E.

  (2015) Journal of Nanoscience and Nanotechnology, 15 (8), pp. 5993-6000

• Toward quasi-solid state Dye-sensitized Solar Cells: Effect of γ-Al2O3 nanoparticle dispersion into liquid electrolyte

  Sacco, A., Lamberti, A., Gerosa, M., Bisio, C., Gatti, G., Carniato, F., Shahzad, N., Chiodoni, A., Tresso, E., Marchese, L.

  (2015) Solar Energy, 111, pp. 125-134

• Leveraging ZnO morphologies in piezoelectric composites for mechanical energy harvesting

  Cauda, V., Stassi, S., Lamberti, A., Morello, M., Fabrizio Pirri, C., Canavese, G.

  (2015) Nano Energy, 18, pp. 212-221

• Shape-controlled synthesis of silver nature-like spiky particles for piezoresistive sensor applications

  Stassi, S., Cauda, V., Canavese, G., Manfredi, D., Chiodoni, A., Pirri, C.F.

  (2015) European Journal of Inorganic Chemistry, 2014 (16), pp. 2711-2719

• Evaluation of the piezoelectric properties and voltage generation of flexible zinc oxide thin films

  Laurenti, M., Stassi, S., Lorenzoni, M., Fontana, M., Canavese, G., Cauda, V., Pirri, C.F.

  (2015) Nanotechnology, 26 (21), art. no. 215704

• Flexible piezoelectric energy nanogenerator based on ZnO nanotubes hosted in a polycarbonate membrane

  Stassi, S., Cauda, V., Ottone, C., Chiodoni, A., Pirri, C.F., Canavese, G.

  (2015) Nano Energy, 13, pp. 474-481

• Surface area enhancement by mesoporous silica deposition on microcantilever sensors for small molecule detection

  Stassi, S., Cauda, V., Fiorilli, S., Ricciardi, C.

  (2015) Journal of Materials Chemistry C, 3 (48), pp. 12507-12513

• Nanostructured piezoelectric polymers

  Cauda, V., Canavese, G., Stassi, S.

  (2015) Journal of Applied Polymer Science, 132 (13), art. no. 41667

• Nanobranched ZnO Structure: P-Type Doping Induces Piezoelectric Voltage Generation and Ferroelectric-Photovoltaic Effect

  Laurenti, M., Canavese, G., Sacco, A., Fontana, M., Bejtka, K., Castellino, M., Pirri, C.F., Cauda, V.

  (2015) Advanced Materials, 27 (28), pp. 4218-4223

• Impedance characterization, degradation, and in vitro biocompatibility for platinum electrodes on BioMEMS

  Geninatti, T., Bruno, G., Barile, B., Hood, R.L., Farina, M., Schmulen, J., Canavese, G., Grattoni, A.

  (2015) Biomedical Microdevices, 17 (1), pp. 1-11

• Electrodes/electrolyte interfaces in the presence of a surface-modified photopolymer electrolyte: Application in dye-sensitized solar cells

  Sacco, A., Bella, F., De La Pierre, S., Castellino, M., Bianco, S., Bongiovanni, R., Pirri, C.F.

  (2015) ChemPhysChem, 16 (5), pp. 960-969

• Sponge-like ZnO nanostructures by low temperature water vapor-oxidation method as dye-sensitized solar cell photoanodes

  Lamberti, A., Sacco, A., Laurenti, M., Fontana, M., Pirri, C.F., Bianco, S.

  (2015) Journal of Alloys and Compounds, 615 (S1), pp. S487-S490

• Ultrafast room-temperature crystallization of TiO2 nanotubes exploiting water-vapor treatment

  Lamberti, A., Chiodoni, A., Shahzad, N., Bianco, S., Quaglio, M., Pirri, C.F.

  (2015) Scientific Reports, 5, art. no. 7808

• A long-term analysis of Pt counter electrodes for Dye-sensitized Solar Cells exploiting a microfluidic housing system

  Sacco, A., Pugliese, D., Lamberti, A., Castellino, M., Chiodoni, A., Virga, A., Bianco, S.

  (2015) Materials Chemistry and Physics, 161, art. no. 18111, pp. 74-83

• Enhancement of photoconversion efficiency in dye-sensitized solar cells exploiting pulsed laser deposited niobium pentoxide blocking layers

  Sacco, A., Di Bella, M.S., Gerosa, M., Chiodoni, A., Bianco, S., Mosca, M., Macaluso, R., Calì, C., Pirri, C.F.

  (2015) Thin Solid Films, 574, pp. 38-42

• Ultrasensitive Ag-coated TiO2 nanotube arrays for flexible SERS-based optofluidic devices

  Lamberti, A., Virga, A., Chiadò, A., Chiodoni, A., Bejtka, K., Rivolo, P., Giorgis, F.

  (2015) Journal of Materials Chemistry C, 3 (26), pp. 6868-6875

• Microfluidic photocatalytic device exploiting PDMS/TiO2 nanocomposite

  Lamberti, A.

  (2015) Applied Surface Science, 335, pp. 50-54

• Microfluidic electrochemical growth of vertically aligned TiO2 nanotubes for SERS optofluidic devices

  Lamberti, A., Virga, A., Giorgis, F.

  (2015) RSC Advances, 5 (127), pp. 105484-105488

• One-pot synthesis of graphene-molybdenum oxide hybrids and their application to supercapacitor electrodes

  Giardi, R., Porro, S., Topuria, T., Thompson, L., Pirri, C.F., Kim, H.-C.

  (2015) Applied Materials Today, 1 (1), pp. 27-32

• Self-standing polymer-functionalized reduced graphene oxide papers obtained via a UV-process

  Roppolo, I., Chiappone, A., Boggione, L., Castellino, M., Bejtka, K., Pirri, C.F., Sangermano, M., Chiolerio, A.

  (2015) RSC Advances, 5 (116), pp. 95805-95812

• Two-Photon Polymerization Lithography and Laser Doppler Vibrometry of a SU-8-Based Suspended Microchannel Resonator

  Accoto, C., Qualtieri, A., Pisanello, F., Ricciardi, C., Pirri, C.F., Vittorio, M.D., Rizzi, F.

  (2015) Journal of Microelectromechanical Systems, 24 (4), art. no. 6995979, pp. 1038-1042

• Step-and-repeat nanoimprint on pre-spin coated film for the fabrication of integrated optical devices

  Calafiore, G., Koshelev, A., Dhuey, S., Sassolini, S., Messerschmidt, M., Schleunitz, A., Goltsov, A., Piña-Hernandez, C., Pirri, F.C., Yankov, V., Cabrini, S., Peroz, C.

  (2015) Journal of Micro/ Nanolithography, MEMS, and MOEMS, 14 (3), art. no. 033506

• Ultraviolet mem-sensors: flexible anisotropic composites featuring giant photocurrent enhancement

  Chiolerio, A., Roppolo, I., Cauda, V., Crepaldi, M., Bocchini, S., Bejtka, K., Verna, A., Pirri, C.F.

  (2015) Nano Research, 8 (6), pp. 1956-1963

• Enhanced performance of graphene-epoxy flexible capacitors by means of ceramic fillers

  Sangermano, M., Buzzerio, G., Rizzoli, R., Ortolani, L., Morandi, V., Pirri, F., Chiolerio, A.

  (2015) Macromolecular Chemistry and Physics, 216 (7), pp. 707-713

• Reduction of bacterial adhesion on dental composite resins by silicon-oxygen thin film coatings

  Mandracci, P., Mussano, F., Ceruti, P., Pirri, C.F., Carossa, S.

  (2015) Biomedical Materials (Bristol), 10 (1), art. no. 015017

• Memristive devices based on graphene oxide

  Porro, S., Accornero, E., Pirri, C.F., Ricciardi, C.

  (2015) Carbon, 85, pp. 383-396

• Dispelling clichés at the nanoscale: the true effect of polymer electrolytes on the performance of dye-sensitized solar cells

  Bella, F., Sacco, A., Massaglia, G., Chiodoni, A., Pirri, C.F., Quaglio, M.

  (2015) Nanoscale, 7 (28), pp. 12010-12017

• A novel Smart Caliper Foam pig for low-cost pipeline inspection – Part B: Field Test and data processing

  C. Ramella, G. Canavese, S. Corbellini, M. Pirola, M. Cocuzza, L. Scaltrito, S. Ferrero, C.F. Pirri, G. Ghione, V. Rocca, A. Tasso, A. Di Lullo

  Journal of Petroleum Science and Engineering, September 2015, Vol. 133, pp. 771-775, http://dx.doi.org/10.1016/j.petrol.2014.09.038

• An hyper-realistic method for facial approximation: the case of italian humanist Angelo Poliziano

  Milani C., Capussotto V., Guaschino M., Mombello D., Cocuzza M., Pirri C.F., Panattoni G.L., Lambiase S., Gruppioni G.

  Journal of Biological and Clinical Anthropology, 72(2), 2015, pp. 235-244, DOI: http://dx.doi.org/10.1127/anthranz/2015/0493

• Metal-elastomer nanostructures for tunable SERS and easy microfluidic integration

  A. Lamberti, A. Virga, A. Angelini, A. Ricci, E. Descrovi, M. Cocuzza and F. Giorgis

  RSC Adv., 5, 2015, pp. 4404-4410, DOI: 10.1039/C4RA12168F

• Blue and UV combined photolithographic polymerization for the patterning of thick structures

  E. Fantino, A. Vitale, M. Quaglio, M. Cocuzza, C.F. Pirri, R. Bongiovanni

  Chemical Engineering Journal, Vol. 267, pp. 65-72, DOI: 10.1016/j.cej.2014.12.088

• A novel Smart Caliper Foam pig for low-cost pipeline inspection – Part A: Design and Laboratory Characterization

  C. Ramella, G. Canavese, S. Corbellini, M. Pirola, M. Cocuzza, L. Scaltrito, S. Ferrero, C.F. Pirri, G. Ghione, F. Verga, A. Tasso, A. Di Lullo

  Journal of Petroleum Science and Engineering, Vol. 127, pp. 311-317, doi:10.1016/j.petrol.2015.01.008

• Convective heat transfer enhancement for electronic device applications using patterned MWCNTs structures

  M. I. Shahzad, M. Giorcelli, L. Ventola, D. Perrone, N. Shahzad, E. Chiavazzo, P. Asinari, M. Cocuzza, A. Tagliaferro

  Heat Transfer Engineering, August 2015, DOI: 10.1080/01457632.2015.1080570

• Reduction of bacterial adhesion on dental composite resins by silicon-oxygen thin film coatings

  P Mandracci, F Mussano, P Ceruti, C F Pirri, S Carossa

  Biomedical Materials Vol. 10 article number 015017, doi:10.1088/1748-6041/10/1/015017

• Oxygen Inhibition Lithography for the Fabrication of Multi-Polymeric Structures

  A. Vitale, M. Quaglio, A. Chiodoni, K. Bejtka, M. Cocuzza, C.F. Pirri and R. Bongiovanni

  Advanced Materials, 2015, Vol.27(31), pp. 4560-4565, doi:10.1002/adma.201501737

• Memristive behaviour in inkjet printed graphene oxide thin layers

  S. Porro, C. Ricciardi

  (2015) RSC Advances, 5, 68565-68570, DOI: 10.1039/C5RA11058K

• Synthesis of polyaniline-based inks for inkjet printed devices: electrical characterization highlighting the effect of

  A. Chiolerio, S. Bocchini, F. Scaravaggi, S. Porro, D. Perrone, D. Beretta, M. Caironi, C. F. Pirri,

  (2015) Semiconductor Science and Technology 30, 104001. DOI: 10.1088/0268-1242/30/10/104001

• Zinc oxide nanostructures by chemical vapour deposition as anodes for Li-ion batteries

  M. Laurenti, N. Garino, S. Porro, M. Fontana, C. Gerbaldi

  (2015) Journal of Alloys and Compounds 640, 321-326. DOI: 10.1016/j.jallcom.2015.03.222

• 2014

• Surface-Wave-Assisted Beaming of Light Radiation from Localized Sources

  Angelini, A., Munzert, P., Enrico, E., De Leo, N., Scaltrito, L., Boarino, L., Giorgis, F., Descrovi, E.

  (2014) ACS Photonics, 1 (7), pp. 612-617

• Micro-structured rough surfaces by laser etching for heat transfer enhancement on flush mounted heat sinks

  Ventola, L., Scaltrito, L., Ferrero, S., Maccioni, G., Chiavazzo, E., Asinari, P.

  (2014) Journal of Physics: Conference Series, 525 (1), art. no. 012017

• SERS active silver nanoparticles synthesized by inkjet printing on mesoporous silicon

  Novara, C., Petracca, F., Virga, A., Rivolo, P., Ferrero, S., Chiolerio, A., Geobaldo, F., Porro, S., Giorgis, F.

  (2014) Nanoscale Research Letters, 9 (1), pp. 1-7

• Properties of ZnO nanorods grown by hydrothermal synthesis on conductive layers

  Podrezova, L.V., Cauda, V., Stassi, S., Cicero, G., Abdullin, Kh.A., Alpysbaeva, B.E.

  (2014) Crystal Research and Technology, 49 (8), pp. 599-605

• Structure-property relations in amorphous carbon for photovoltaics

  Risplendi, F., Bernardi, M., Cicero, G., Grossman, J.C.

  (2014) Applied Physics Letters, 105 (4), art. no. 043903

• Scaling and spatial analysis of the dielectric response of cadmium selenide nanowires

  Kanai, Y., Cicero, G.

  (2014) Physical Review B - Condensed Matter and Materials Physics, 90 (16), art. no. 165417

• Ethanol gas sensing mechanism in ZnO Nanowires: An ab initio study

  Korir, K.K., Catellani, A., Cicero, G.

  (2014) Journal of Physical Chemistry C, 118 (42), pp. 24533-24537

• One-dimensional photonic crystals with cylindrical geometry

  Roussey, M., Descrovi, E., Häyrinen, M., Angelini, A., Kuittinen, M., Honkanen, S.

  (2014) Optics Express, 22 (22), pp. 27236-27241

• In-plane 2D focusing of surface waves by ultrathin refractive structures

  Angelini, A., Lamberti, A., Ricciardi, S., Frascella, F., Munzert, P., De Leo, N., Descrovi, E.

  (2014) Optics Letters, 39 (22), pp. 6391-6394

• Multifunctional NIR-reflective and self-cleaning UV-cured coating for solar cell applications based on cycloaliphatic epoxy resin

  Roppolo, I., Shahzad, N., Sacco, A., Tresso, E., Sangermano, M.

  (2014) Progress in Organic Coatings, 77 (2), pp. 458-462

• Coral-shaped ZnO nanostructures for dye-sensitized solar cell photoanodes

  Lamberti, A., Gazia, R., Sacco, A., Bianco, S., Quaglio, M., Chiodoni, A., Tresso, E., Pirri, C.F.

  (2014) Progress in Photovoltaics: Research and Applications, 22 (2), pp. 189-197

• Using a stack shunt to mitigate catalyst support carbon corrosion in polymer electrolyte membrane fuel cell stacks during start-stop cycling

  Bona, D., Curtin, D.E., Pedrazzo, F., Tresso, E.M.

  (2014) Journal of Fuel Cell Science and Technology, 11 (1), art. no. 011010

• TiO2 nanotubes as flexible photoanode for back-illuminated dye-sensitized solar cells with hemi-squaraine organic dye and iodine-free transparent electrolyte

  Pugliese, D., Lamberti, A., Bella, F., Sacco, A., Bianco, S., Tresso, E.

  (2014) Organic Electronics: physics, materials, applications, 15 (12), pp. 3715-3722

• Novel spongelike nanostructured ZnO films: Properties and applications

  Gazia, R., Canavese, G., Chiodoni, A., Lamberti, A., Stassi, S., Sacco, A., Bianco, S., Virga, A., Tresso, E., Pirri, C.F.

  (2014) Journal of Alloys and Compounds, 586 (SUPPL. 1), pp. S331-S335

• Flexible tactile sensing based on piezoresistive composites: A review

  Stassi, S., Cauda, V., Canavese, G., Pirri, C.F.

  (2014) Sensors (Switzerland), 14 (3), pp. 5296-5332

• Piezoresistive flexible composite for robotic tactile applications

  Canavese, G., Stassi, S., Fallauto, C., Corbellini, S., Cauda, V., Camarchia, V., Pirola, M., Pirri, C.F.

  (2014) Sensors and Actuators, A: Physical, 208, pp. 1-9

• Shape-controlled synthesis of silver nature-like spiky particles for piezoresistive sensor applications

  Stassi, S., Cauda, V., Canavese, G., Manfredi, D., Chiodoni, A., Pirri, C.F.

  (2014) European Journal of Inorganic Chemistry, (16), pp. 2711-2719

• Stretchable and wearable piezoresistive insole for continuous pressure monitoring

  Canavese, G., Stassi, S., Fallauto, C., Corbellini, S., Cauda, V., Di Donato, M., Pirola, M., Pirri, F.C.

  (2014) Key Engineering Materials, 605, pp. 474-477

• Synthesis of ferroelectric BaTiO3 tube-like arrays by hydrothermal conversion of a vertically aligned TiO2 nanotube carpet

  Lamberti, A., Garino, N., Bejtka, K., Bianco, S., Stassi, S., Chiodoni, A., Canavese, G., Pirri, C.F., Quaglio, M.

  (2014) New Journal of Chemistry, 38 (5), pp. 2024-2030

• Comprehensive study of the templating effect on the ZnO nanostructure formation within porous hard membranes

  Ottone, C., Bejtka, K., Chiodoni, A., Farías, V., Roppolo, I., Canavese, G., Stassi, S., Cauda, V.

  (2014) New Journal of Chemistry, 38 (5), pp. 2058-2065

• Real-time pedobarography analysis by piezoresistive wearable insole

  Canavese, G., Stassi, S., Fallauto, C., Corbellini, S., Cauda, V., Di Donato, M., Pirola, M., Pirri, F.C.

  (2014) Sensor Letters, 12 (9), pp. 1427-1432

• Tunable electromechanical actuation in silicone dielectric film

  Lamberti, A., Di Donato, M., Chiappone, A., Giorgis, F., Canavese, G.

  (2014) Smart Materials and Structures, 23 (10), art. no. 105001

• Process optimisation of a MEMS based PZT actuated microswitch

  A. Tommasi, G. Coletta, D. Balma, S. Marasso, D. Perrone, G. Canavese, S. Stassi, S. Bianco, M. Cocuzza, C.F. Pirri

  Microelectronic Engineering, 2014, Volume 119C, pp. 137-140, doi:10.1016/j.mee.2014.04.005

• Bloch surface waves on dielectric photonic crystals for biological sensing

  M Ballarini, N Danz, F Frascella, S Ricciardi, P Rivolo, P Mandracci, L Napione, L Dominici, A Sinibaldi, F Michelotti, F Giorgis, F Bussolino, E Descrov

  Lecture Notes in Electrical Engineering 162: 107-111

• A polymer Lab-on-a-Chip for genetic analysis using the arrayed primer extension on microarray chips

  S.L. Marasso, D. Mombello, M. Cocuzza, D. Casalena, I. Ferrante, A. Nesca, P. Poiklik, K. Rekker, A. Aaspollu, S. Ferrero, C.F. Pirri

  Biomed. Microdev., Vol. 16(5), 2014, pp.661-670, DOI: 10.1007/s10544-014-9869-x

• Novel electrode and electrolyte membranes: Towards flexible dye-sensitized solar cell combining vertically aligned TiO2 nanotube array and light-cured polymer

  Bella, F., Lamberti, A., Sacco, A., Bianco, S., Chiodoni, A., Bongiovanni, R.

  (2014) Journal of Membrane Science, 470, pp. 125-131

• New insights in long-term photovoltaic performance characterization of cellulose-based gel electrolytes for stable dye-sensitized solar cells

  Salvador, G.P., Pugliese, D., Bella, F., Chiappone, A., Sacco, A., Bianco, S., Quaglio, M.

  (2014) Electrochimica Acta, 146, pp. 44-51

• Additives and salts for dye-sensitized solar cells electrolytes: What is the best choice?

  Bella, F., Sacco, A., Pugliese, D., Laurenti, M., Bianco, S.

  (2014) Journal of Power Sources, 264, pp. 333-343

• Investigation of transport and recombination properties in graphene/titanium dioxide nanocomposite for dye-sensitized solar cell photoanodes

  Sacco, A., Porro, S., Lamberti, A., Gerosa, M., Castellino, M., Chiodoni, A., Bianco, S.

  (2014) Electrochimica Acta, 131, pp. 154-159

• Photocured polymer electrolyte membranes for dye-sensitized solar cells

  Sacco, A., Bella, F., Bianco, S., Bongiovanni, R.

  (2014) Photovoltaics: Synthesis, Applications and Emerging Technologies, pp. 53-71

• Polymer electrolytes for dye-sensitized solar cells prepared by photopolymerization of PEG-based oligomers

  Bella, F., Ozzello, E.D., Sacco, A., Bianco, S., Bongiovanni, R.

  (2014) International Journal of Hydrogen Energy, 39 (6), pp. 3036-3045

• Multi-functional energy conversion and storage electrodes using flower-like Zinc oxide nanostructures

  Cauda, V., Pugliese, D., Garino, N., Sacco, A., Bianco, S., Bella, F., Lamberti, A., Gerbaldi, C.

  (2014) Energy, 65, pp. 639-646

• Wetting behavior of hierarchical oxide nanostructures: TiO2 nanotubes from anodic oxidation decorated with ZnO nanostructures

  Ottone, C., Lamberti, A., Fontana, M., Cauda, V.

  (2014) Journal of the Electrochemical Society, 161 (10), pp. D484-D488

• Protein immobilization on nanoporous silicon functionalized by RF activated plasma polymerization of Acrylic Acid

  P. Rivolo, S. M. Severino, S. Ricciardi, F. Frascella, F. Geobaldo

  Journal of Colloid and Interface Science, 416 pp. 73-80 - ISSN 0021-9797

• Fluorescence imaging assisted by surface modes on dielectric multilayers

  E. Descrovi, D. Morrone, A. Angelini, F. Frascella, S. Ricciardi, P. Rivolo, N. De Leo, L. Boarino, P. Munzert, F. Michelotti, F. Giorgis

  The European Journal D, Atomic Molecular and Optical Physics, 68(3): 53 - ISSN 1434-6060

• Zn vacancy induced green luminescence on non-polar surfaces in ZnO nanostructures

  1. F. Fabbri, M. Villani, A. Catellani, A. Calzolari, G. Cicero, D. Calestani, G. Calestani, A. Zappettini, B. Dierre, T. Sekiguchi and G. Salviati

  Scientific Reports, 4, 5158 (2014)

• Functionalization layer effect on the mechanical properties of silicon based micro-cantilever mass sensors: A theoretical study

  F. Risplendi, A. Ricci and G. Cicero

  Sensors and Actuators B: Chemical 195, 177-180 (2014)

• Composite materials based on Nanostructured Zinc Oxide

  Kh. A. Abdullin, N. B. Bakranov, D. V. Ismailov, J. K. Kalkozova, S. E. Kumekov, L. V. Podrezova and G. Cicero

  Semiconductors, 48, 471-475 (2014)

• OncomiR detection in circulating body fluids: a PDMS microdevice perspective

  C. Potrich, V. Vaghi, L. Lunelli, L. Pasquardini, G.C. Santini, C. Ottone, M. Quaglio, M. Cocuzza, C.F. Pirri, M. Ferracin, M. Negrini, P. Tiberio, V. De Sanctis, R. Bertorelli and C. Pederzolli

  Lab Chip, 14 (20), 2014, pp. 4067-4075, DOI: 10.1039/C4LC00630E

• PDMS membranes with tunable gas permeability for microfluidic applications

  A. Lamberti, S. Marasso, M. Cocuzza

  RSC Adv., 4 (106), pp. 61415-61419, DOI: 10.1039/c4ra12934b

• 2013

• Liposomes sensing and monitoring by Organic Electrochemical Transistors integrated in microfluidics

  G. Tarabella, A.G. Balducci, N. Coppedè, S. Marasso, S. Barbieri, M. Cocuzza, P. Colombo, R. Mosca, F. Sonvico, S. Iannotta

  Biochimica et Biophysica Acta (BBA) - General Subjects, 1830, 2013, pp. 4374-4380, 10.1016/j.bbagen.2012.12.018

• Smart piezoresistive tunnelling composite for flexible robotic sensing skin

  S. Stassi, G. Canavese, M. Cocuzza, F. Cosiansi, R. Gazia, C. Fallauto, S. Corbellini, M. Pirola

  Smart Materials and Structures, 22 (2013) 125039

• Siloxane photopolymer to replace polydimethylsiloxane in microfluidic devices for Polymerase Chain Reaction

  A.Vitale, M. Quaglio, S. Turri, M. Cocuzza, R. Bongiovanni

  Polym. Adv. Technol., 24, 2013, pp. 1068–1074, DOI: 10.1002/pat.3189

• Effect of the fabrication method on the functional properties of BaTiO3 - PVDF nanocomposites

  A.Chiolerio, M. Lombardi, A. Guerriero, G. Canavese, S. Stassi, R. Gazia, V. Cauda, D. Manfredi, A. Chiodoni, A. Verna, M. Cocuzza, L. Montanaro, C. F. Pirri

  Journal of Materials Science, October 2013, 48 (20), pp. 6943-6951 DOI: 10.1007/s10853-013-7500-9

• Direct Photolithography of Perfluoropolyethers for Solvent-resistant Microfluidics

  A. Vitale, M. Quaglio, S. L. Marasso, A. Chiodoni, M. Cocuzza and R. M. Bongiovanni

  Langmuir, 2013, 29 (50), pp 15711–15718, DOI: 10.1021/la402755q

• Piezoelectric properties of zinc oxide nanowires: an ab initio study

  K. K. Korir, G. Cicero and A. Catellani

  Nanotechnology 24, 475401 (2013)

• Comparison of Hemi-Squaraine Sensitized TiO2 and ZnO Photoanodes for DSSC Applications

  N. Shazad, F. Risplendi, D. Pugliese, S. Bianco, A. Sacco, A. Lamberti, R. Gazia, E. Tresso and G. Cicero

  J. Phys. Chem. C 117, 22778 (2013)

• Comparison between ZnO nanowires grown by chimical vapor deposition and hydrothermal synthesis

  L. V. Podrezova, S. Porro, V. Cauda, M. Fontana and G. Cicero

  Appl. Phys. A 113, 623-632, (2013)

• First principles description of the electronic properties of doped ZnO

  A. Catellani, A. Ruini, G. Cicero and A. Calzolari

  Phys. Status Solidi B 250, 2106-2109, (2013)

• Combined experimental and theoretical investigation of the hemi-squaraine/TiO2 interface for dye sensitized solar cells

  G. Cicero, G. Musso, A. Lamberti, B. Camino, S. Bianco, D. Pugliese, F. Risplendi, A. Sacco, N. Shahzad, A. M. Ferrari, B. Ballarin, C. Barolo, E. Tresso and G. Caputo

  Phys. Chem. Chem. Phys. 15, 7198-7203 (2013)

• A quantum-mechanical study of the adsorption of prototype dye molecules on rutile-TiO2(110): a comparison between catechol and isonicotinic acid

  F. Risplendi, G. Cicero, G. Mallia and N. M. Harrison

  Phys. Chem. Chem. Phys. 15, 235-43 (2013)

• Si(1 1 1) surface functionalized with H-bonded SAM: A theoretical study

  F. Risplendi and G. Cicero

  Appl. Surf. Sci. 267, 17-20 (2013)

• Bloch surface wave-enhanced fluorescence biosensor

  K. Toma, E. Descrovi, M. Toma, M. Ballarini, P. Mandracci, F. Giorgis, A. Mateescu, U. Jonas, W. Knoll, J. Dostálek

  BIOSENSORS & BIOELECTRONICS, vol. 43, pp. 108-114 (2013)

• Fluorescence diffraction assisted by Bloch surface waves on a one-dimensional photonic crystal

  A. Angelini, E. Enrico, N. De Leo, P. Munzert, L. Boarino, F. Michelotti, F. Giorgis, E. Descrovi

  NEW JOURNAL OF PHYSICS, vol. 15, 073002 (2013)

• A Fluorescent One-Dimensional Photonic Crystal for Label-Free Biosensing Based on Bloch Surface Waves

  F. Frascella, S. Ricciardi, P. Rivolo, V. Moi, F. Giorgis, E. Descrovi, F. Michelotti, P. Munzert, N. Danz, L. Napione, M. Alvaro, F. Bussolino

  SENSORS, vol. 13, pp. 2011-2022 (2013)

• Leakage radiation interference microscopy

  E. Descrovi, E. Barakat , A. Angelini, P. Munzert, N. De Leo, L. Boarino, F. Giorgis, H.P. Herzig

  OPTICS LETTERS, vol. 38, pp. 3374-3376 (2013)

• Silver Nanoparticles on Porous Silicon: Approaching Single Molecule Detection in Resonant SERS Regime

  A. Virga, P. Rivolo, F. Frascella, A. Angelini, E. Descrovi, F. Geobaldo, F. Giorgis

  JOURNAL OF PHYSICAL CHEMISTRY. C, NANOMATERIALS AND INTERFACES, vol. 117 n. 39, pp. 20139-20145 (2013)

• Characterization of photovoltaic modules for low-power indoor application

  Sacco, A., Rolle, L., Scaltrito, L., Tresso, E., Pirri, C.F.

  Applied Energy, 102, pp. 1295-1302 (2013)

• Nanostructured silicon carbon thin films grown by plasma enhanced chemical vapour deposition technique

  Coscia, U., Ambrosone, G., Basa, D.K., Rigato, V., Ferrero, S., Virga, A.

  Thin Solid Films, 543, pp. 27-31. (2013)

• Fabrication of microstructures on different materials by diode-pumped solid state laser writing for microfluidics applications

  Chen, Q., Maccioni, G., Chen, Q., Sacco, A., Ferrero, S., Scaltrito, L.

  Microsystem Technologies, 19 (8), pp. 1185-1194. (2013)

• Fabrication of Ni/Ti/Al Schottky contact to n-type 4H-SiC under various annealing conditions

  Zaman, M.Y., Ferrero, S., Perrone, D., Scaltrito, L., Shahzad, N., Pugliese, D.

  Journal of Physics: Conference Series, 439 (1), art. no. 012027, .

• Series resistance study of Schottky diodes developed on 4H-SiC wafers using a contact of titanium or molybdenum

  Shili, K., Ben Karoui, M., Gharbi, R., Abdelkrim, M., Fathallah, M., Ferrero, S.

  Microelectronic Engineering, 106, pp. 43-47. (2013)

• Growth and characterization of silicon nanocrystallites embedded in amorphous silicon carbon matrix by PECVD

  Coscia, U., Ambrosone, G., Basa, D.K., Rigato, V., Ballarini, M., Virga, A., Ferrero, S., Mercaldo, L.V.

  Physica Status Solidi (C) Current Topics in Solid State Physics, 9 (10-11), pp. 1869-1872. (2012)

• Development of a microcantilever-based immunosensing method for mycotoxin detection

  Ricciardi C., Castagna R., Ferrante I., Frascella F., Luigi Marasso S., Ricci A., Canavese G., Lore A., Prelle A., Lodovica Gullino M., Spadaro D

  BIOSENSORS & BIOELECTRONICS, vol. 40, pp. 233-239, DOI 10.1016/j.bios.2012.07.029

• Development of an innovative microcantilever-based biosensor for 17β-estradiol detection in bovine muscles: preliminary results

  Danilo Pitardi,Marzia Pezzolato,Guia Richelmi,Marilena Gili,Daniele Di Corcia,Niccolò Ciprianetti,Ivan Ferrante,Karin Santoro,Carlo Ricciardi,Elena Bozzetta

  ITALIAN JOURNAL OF FOOD SAFETY, Vol. 2, DOI http://dx.doi.org/10.4081/ijfs.2013.e12

• Functionalization protocols of silicon micro/nano-mechanical biosensors

  Frascella F., Ricciardi C.

  Nanomaterial Interfaces in Biology Nanomaterial Interfaces in Biology. Springer, pp. 109-115

• Immunodetection of 17beta-estradiol in serum at ppt level by microcantilever resonators

  Ricciardi C., Ferrante I., Castagna R., Frascella F., Marasso S.L., Santoro K., Gili M., Pitardi D., Pezzolato M., Bozzetta E.

  BIOSENSORS & BIOELECTRONICS, vol. 40, pp. 407-411

• Toward mechano-spintronics : Nanostructured magnetic multilayers for the realization of microcantilever sensors featuring wireless actuation for liquid environments

  A. Chiolerio, I. Ferrante, A. Ricci, S. Marasso, P. Tiberto, G. Canavese, C. Ricciardi, P. Allia

  JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, vol. 24 n. 18, pp. 2189-2196

• A finite element model for the frequency spectrum estimation of a resonating microplate in a microfluidic chamber

  Alessandro Ricci, Giancarlo Canavese, Ivan Ferrante, Simone Luigi Marasso, Carlo Ricciardi

  MICROFLUIDICS AND NANOFLUIDICS, vol. 15 n. 2, pp. 275-284

• Growth of vertically aligned multiwall carbon nanotubes columns

  M.I. Shahzad, M. Giorcelli, D. Perrone, A. Virga, N. Shahzad, P. Jagdale, M. Cocuzza and A. Tagliaferro

  Journal of Physics: Conference Series, 2013, Vol. 439, 012008, doi:10.1088/1742-6596/439/1/012008

• 2012

• Evaluation of correct value of Richardson's constant by analyzing the electrical behavior of three different diodes at different temperatures

  M. Y. Zaman, D. Perrone, S. Ferrero, L. Scaltrito and M. Naretto

  Materials Science Forum Vol. 711 (2012) pp 174-178 (2012) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/MSF.711.174

• Barrier inhomogeneities of a medium size Mo/4H-SiC Schottky diode

  M. Y. Zaman, D. Perrone, S. Ferrero, L. Scaltrito and M. Naretto

  Materials Science Forum Vol. 711 (2012) pp 188-192 (2012) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/MSF.711.188

• Photopolymerization of a perfluoropolyether oligomer and photolithographic processes for the fabrication of microfluidic devices

  A. Vitale, M. Quaglio, M. Cocuzza, C.F. Pirri, R. Bongiovanni

  Eur Polym J, 2012, 48 (6), pp. 1118 - 1126, doi:10.1016/j.eurpolymj.2012.03.016

• Current and future nanotech applications in the oil industry

  M. Cocuzza, C. F. Pirri, V. Rocca, F. Verga

  Am. J. Applied Sci., 2012, 9, pp. 784-793, doi: 10.3844/ajassp.2012.784.793

• Surface energy tailoring of glass by contact printed PDMS

  A. Lamberti, M. Quaglio, A. Sacco, M. Cocuzza, C. F. Pirri

  Appl. Surf. Sci., Vol. 258(23), 15 September 2012, Pages 9427-9431, doi:10.1016/j.apsusc.2011.12.117

• Electrical response of electrolytic cells limited by different types of electrodes

  A. L. Alexe-Ionescu, G. Barbero, S. Bianco, G. Cicero and C. F. Pirri

  J. of Electroan. Chem. 669, 21-27, (2012)

• Effect of nitrogen impurities on the physical properties of ZnO nanowires: First-principles study

  S. Haffad, M. Samah and G. Cicero

  Phys. Rev. B 85, 165207 (2012)

• Bloch surface waves-controlled fluorescence emission: coupling into nanometer-sized polymeric waveguides

  M. Ballarini, F. Frascella, E. Enrico, P. Mandracci, N. De Leo, F. Michelotti, F. Giorgis, E. Descrovi

  APPLIED PHYSICS LETTERS, vol. 100, 63305 (2012)

• Direct patterning of silver particles on porous silicon by inkjet printing of a silver salt via in-situ reduction

  A. Chiolerio, A. Virga, P. Pandolfi, P. Martino, P. Rivolo, F. Geobaldo, F. Giorgis

  NANOSCALE RESEARCH LETTERS, vol. 7, pp. 502-507 (2012)

• Hydrogenated amorphous silicon nitride photonic crystals for improved-performance surface electromagnetic wave biosensors

  A. Sinibaldi, E. Descrovi, F. Giorgis, L. Dominici, M. Ballarini, P. Mandracci, N. Danz, F. Michelotti

  BIOMEDICAL OPTICS EXPRESS, vol. 3 n. 10, pp. 2405-2410 (2012)

• Real time secondary antibody detection by means of silicon-based multilayers sustaining Bloch Surface Waves

  P. Rivolo, F. Michelotti, F. Frascella, G. Digregorio, P. Mandracci, L. Dominici, F. Giorgis, E. Descrovi

  SENSORS AND ACTUATORS. B, CHEMICAL, vol. 161 n. 1, pp. 1046-1052 (2012)

• SERS active Ag nanoparticles in mesoporous silicon: detection of organic molecules and peptide-antibody assays

  A. Virga, P. Rivolo, E. Descrovi, A. Chiolerio, G. Digregorio, F. Frascella, M. Soster, F. Bussolino, S. Marchiò, F. Geobaldo, F. Giorgis

  JOURNAL OF RAMAN SPECTROSCOPY, vol. 43 n. 6, pp. 730-736 (2012)

• Surface label-free sensing by means of a fluorescent multilayered photonic structure

  E. Descrovi, F. Frascella, M. Ballarini, V. Moi, A. Lamberti, F. Michelotti, F. Giorgis, C. F. Pirri

  APPLIED PHYSICS LETTERS, vol. 101, 131105 (2012)

• A polymer-based functional pattern on onedimensional photonic crystals for photon sorting of fluorescence radiation

  M. Ballarini, F. Frascella, N. De Leo, S. Ricciardi, P. Rivolo, P. Mandracci, E. Enrico, F. Giorgis, F. Michelotti, E. Descrovi

  OPTICS EXPRESS, vol. 20 n. 6, pp. 6703-6711 (2012)

• Fabrication of microstructures on glass by imprinting in conventional furnace for lab-on-chip application

  Chen, Q., Chen, Q., MacCioni, G., Sacco, A., Ferrero, S., Scaltrito, L.

  Microelectronic Engineering, 95, pp. 90-101. (2012)

• Surface Functionalization by Poly-Acrylic Acid Plasma-Polymerized films for Microarray DNA Diagnostics

  S. Ricciardi, R. Castagna, S.M. Severino, I. Ferrante, F. Frascella, E. Celasco, P. Mandracci, I. Vallini, G. Mantero, C.F. Pirri, P. Rivolo

  Surface and Coatings Technology 207 pp. 389-399. DOI: 10.1016/j.surfcoat.2012.07.026 - ISSN 0257-8972

• Switching of fluorescence mediated by a peroxynitrite-glutathione redox reaction in a porous silicon nanoreactor

  B. Sciacca, S. Pace, P. Rivolo, F. Geobaldo

  Physical Chemistry Chemical Physics 14 pp. 5251-5254; DOI: 10.1039/c2cp23996e - ISSN: 1463-9076

• Surface Modification of Cell Culture Carriers: Routes to Anhydride Functionalization of Polystyrene

  M. Nitschke, S. Ricciardi, S. Gramm, S. Zschoche, M. Herklotz, P. Rivolo, C. Werner

  Colloids and Surfaces B - Biointerfaces, 90, pp. 41-47 - ISSN 0927-7765

• Microcantilever Biosensor Array for Cancer Research: From Tumor Marker Detection to Protein Conformational State Analysis

  Castagna R., Ricciardi C.

  Biosensors and Molecular Technologies for Cancer Diagnostics / Keith E. Herold. CRC Press, pp. 805-815. ISBN 9781439841655

• Microcantilever-based Biosensor Array for Tumor Angiogenic Marker Detection

  R. Castagna, C. Ricciardi

  Biosensors and Cancer. CRC PRESS, pp. 43-61. ISBN 9781578087341

• Microcantilver-based DNA hybridization sensors for Salmonella identification.

  Rossella Patti, Maria Teresa Bottero, Alessandra Dalmasso, Ausilia Grassi, Ivan Ferrante, Karin Santoro, Niccolò Ciprianetti, Carlo Ricciardi

  ITALIAN JOURNAL OF FOOD SAFETY, vol. 1 n. 6, pp. 17-19

• Seprion-coated microcantilever sensors for PrPSc detection

  D. Meloni, D. Pitardi, M. Mazza, R. Castagna, I. Ferrante, C. Ricciardi, E. Bozzetta

  PRION, vol. 6, pp. 94-95

• 2011

• A multilevel Lab on chip platform for DNA analysis

  S. L. Marasso, E. Giuri, G. Canavese, R. Castagna, M. Quaglio, I. Ferrante, D. Perrone, M. Cocuzza

  Biomedical Microdevices, DOI: 10.1007/s10544-010-9467-5

• Solid phase DNA extraction on PDMS and direct amplification

  L. Pasquardini, C. Potrich, M. Quaglio, A. Lamberti, S. Guastella, L. Lunelli, M. Cocuzza, L. Vanzetti, C. F. Pirri, C. Pederzolli

  Lab Chip, 2011, 11 (23), 4029 - 4035, DOI: 10.1039/c1lc20371a

• Piezoelectrically actuated MEMS microswitches for high current applications

  D. Balma, A. Lamberti, S. L. Marasso, D. Perrone, M. Quaglio, G. Canavese, S. Bianco, M. Cocuzza

  Microelectronic Engineering, Vol. 88(8), August 2011, Pages 2208-2210, doi: 10.1016/j.mee.2011.02.097

• Cost efficient master fabrication process on copper substrates

  S. Marasso, G. Canavese, M. Cocuzza

  Microelectronic Engineering, Vol. 88(8), August 2011, Pages 2322-2324, doi:10.1016/j.mee.2011.02.023

• Elastomeric nanocomposite based on Carbon Nanotubes for Polymerase Chain Reaction device

  M. Quaglio, S. Bianco, R. Castagna, M. Cocuzza, C.F. Pirri

  Microelectronic Engineering, Vol. 88(8), August 2011, Pages 1860-1863, doi:10.1016/j.mee.2011.01.032

• Anomalous wetting layer at the Au(111) surface

  G. Cicero, A. Calzolari, S. Corni, and A. Catellani

  J. Phys. Chem. Lett. 2, 2582 (2011)

• Mpemba-Like Behavior in Carbon Nanotube Resonators

  P. A. Greaney, G. Lani, G. Cicero and J. C. Grossman

  Metallurgical and Materials Transactions A 42A 3907-3912 (2011)

• Adatom kinetics on nonpolar InN surfaces: implications for one-dimensional Nanostructures growth

  A. Aliano, A. Catellani and G. Cicero

  Appl. Phys. Lett. 99, 193106 (2011)

• Characterization of amorphous In2O3: an ab initio Molecular Dynamics study

  A. Aliano, A. Catellani and G. Cicero

  Appl. Phys. Lett. 99, 211913 (2011)

• Structural and electronic properties of ZnO nanowires: a theoretical study

  S. Haffad, G. Cicero and M. Samah

  Energy Procedia 10, 128-137 (2011)

• Small-signal ac response of an electrolytic cell with recombining space charge

  A. Alexe-Ionescu, G. Barbero, S. Bianco, G. Cicero and E. Tresso

  Physics Letters A, 375 (2011)

• Bloch surface waves-controlled emission of organic dyes grafted on a one-dimensional photonic crystal

  M. Ballarini, F. Frascella, F. Michelotti, G. Digregorio, P. Rivolo, V. Paeder, V. Musi, F. Giorgis, E. Descrovi

  APPLIED PHYSICS LETTERS, vol. 99, 04330 (2011)

• Synthesis of amorphous silicon/magnesia based direct opals with tunable optical properties

  L. Pallavidino, M. Liscidini, A. Virga, A. Chiodoni, E. Descrovi., J. Cos, L. C. Andreani, C. F. Pirri, F. Geobaldo, F. Giorgis

  OPTICAL MATERIALS, vol. 33 n. 3, pp. 563-569 (2011)

• Fabrication of large-area microfluidics structures on glass by imprinting and diode-pumped solid state laser writing techniques

  Chen, Q., Chen, Q., MacCioni, G., Sacco, A., Scaltrito, L., Ferraris, M., Ferrero, S.

  Microsystem Technologies, 17 (10-11), pp. 1611-1619. (2011)

• Inkjet printing and low power laser annealing of silver nanoparticle traces for the realization of low resistivity lines for flexible electronics

  Chiolerio, A., MacCioni, G., Martino, P., Cotto, M., Pandolfi, P., Rivolo, P., Ferrero, S., Scaltrito, L.

  Microelectronic Engineering, 88 (8), pp. 2481-2483.

• Schottky contacts to n-type 4H-SiC fabricated with Ti-, Mo-, Ni- and Al-based metallizations

  Perrone, D., Ferrero, S., Scaltrito, L., Naretto, M., Celasco, E., Pirri, C.F.

  Materials Science Forum, 679-680, pp. 453-456. (2011)

• Influence of rf power on the properties of nanostructured silicon-carbon films deposited by PECVD

  Coscia, U., Ambrosone, G., Basa, D.K., Rava, P., Ferrero, S., Virga, A., Tucci, M.

  Physica Status Solidi (C) Current Topics in Solid State Physics, 8 (3), pp. 823-826. (2011)

• 2010

• LDA+U and tight-binding electronic structure of InN nanowires

  A. Molina-Sanchez, A. Garcia-Cristobal, A. Cantarero , A. Terentjevs and G. Cicero

  Phys. Rev. B 82, 165324 (2010)

• Importance of on-site corrections to the electronic and structural properties of InN in crystalline solid, nonpolar surface, and nanowire forms

  A. Terentjevs, A. Catellani, D. Prendergast and G. Cicero

  Phys. Rev. B 82, 165307 (2010)

• Structural and Electronic Properties of the Methyl-Terminated Si(111) Surface

  A. Antonio, Y. Li, G. Cicero and G. Giulia

  J. Phys. Chem. C 114, 11898–11902 (2010)

• Nitrogen vacancies at InN (100) surfaces: A theoretical study

  A. Terentjevs, A. Catellani and G. Cicero

  Appl. Phys. Lett. 96, 171901 (2010)

• Hydroxyl-Rich β-Sheet Adhesion to the Gold Surface in Water by First-Principle Simulations

  A. Calzolari, G. Cicero, C. Cavazzoni, R. Di Felice, A. Catellani and S. Corni

  J. Am. Chem. Soc. 132, 4790–4795 (2010)

• Barrier inhomogeneities of Mo Schottky barrier diodes on 4H-SiC

  Naretto, M., Perrone, D., Ferrero, S., Scaltrito, L.

  Materials Science Forum, 645-648, pp. 227-230. (2010)

• Characterizations of nanostructured silicon-carbon films deposited on p-layer by PECVD

  Coscia, U., Ambrosone, G., Basa, D.K., Ferrero, S., Veneri, P.D., Mercaldo, L.V., Usatii, I., Tucci, M.

  Physica Status Solidi (C) Current Topics in Solid State Physics, 7 (3-4), pp. 766-769. (2010)

• 4H-SiC Schottky barrier diodes using Mo-, Ti- and Ni-based contacts

  Perrone, D., Naretto, M., Ferrero, S., Scaltrito, L., Pirri, C.F.

  Materials Science Forum, 615 617, pp. 647-650. (2010)

• Amorphous silicon and silicon nitride channel optical waveguides

  E. Celasco; M. Quaglio; A. Chiodoni; C. Ricciardi; C.F. Pirri; L. Dominici; F. Michelotti; F. De Angelis; E. Di Fabrizio; Giorgis F.

  PHYSICA STATUS SOLIDI. C, CURRENT TOPICS IN SOLID STATE PHYSICS, vol. 7 n. 3-4, pp. 836-839

• Development of microcantilever based biosensor array to detect Angiopoietin-1, a marker of tumor angiogenesis

  C. Ricciardi; S. Fiorilli; Bianco S.; G. Canavese; R. Castagna; I. Ferrante; G. Digregorio; S.L. Marasso; L. Napione; F. Bussolino

  BIOSENSORS & BIOELECTRONICS, vol. 25, pp. 1193-1198

• Integration of microfluidic and cantilever technology for biosensing application in liquid environment

  Ricciardi C., Canavese G., Castagna R., Ferrante I., Ricci A., Marasso S.L., Napione L., Bussolino F.

  BIOSENSORS & BIOELECTRONICS, vol. 26, pp. 1565-1570

• Online Portable Microcantilever Biosensors for Salmonella enterica Serotype Enteritidis Detection

  Ricciardi C.; G. Canavese; R. Castagna; G. Digregorio; I. Ferrante; S.L. Marasso; A. Ricci; V. Alessandria; K. Rantsiou; L.S. Cocolin

  FOOD AND BIOPROCESS TECHNOLOGY, vol. 3, pp. 956-960

• a-SiOx coatings grown on dental materials by PECVD: compositional analysis and preliminary investigation of biocompatibility improvements

  Mandracci P.; Ceruti P; Ricciardi C; Mussano F; Carossa S

  CHEMICAL VAPOR DEPOSITION, vol. 16, pp. 29-34

• A new Finite Element approach for studying the effect of surface stress on microstructures

  Ricci A; Ricciardi C.

  SENSORS AND ACTUATORS. A, PHYSICAL, vol. 159, pp. 141-148

• 2009

• Electrothermal modelling for EIBJ nanogap fabrication

  P. Civera, G. Piccinini, D. Demarchi, M. Cocuzza, D. Perrone

  Electrochimica Acta, 54 (2009), 6003-6009, doi:10.1016/j.electacta.2009.02.070

• Surface-induced polarity inversion in ZnO nanowires

  G. Cicero, A. Ferretti, and A. Catellani

  Phys. Rev. B 80, 201304(R) (2009)

• First-principles Investigations of InN Nonpolar Surface Functionalization

  A. Terentjevs, G. Cicero and A. Catellani

  J. Phys. Chem. C 113, 11323 (2009)

• Electronic effects in the IR spectrum of water under confinement

  D. Donadio, G. Cicero, E. Schwegler, M. Sharma and G. Galli

  J. Phys. Chem. B 113, 4170 (2009)

• Anomalous Dissipation in Single-Walled Carbon Nanotube Resonators

  P. A. Greaney, G. Lani, G. Cicero and J. C. Grossman

  Nano Lett. 9, 3699–3703 (2009)

• Study of the electrical characteristics of the CNT/SiC interface

  Castellino, M., Bianco, S., Perrone, D., Musso, S., Giorcelli, M., Maccioni, G., Ferrero, S., Scaltrito, L., Tagliaferro, A.

  Materials Science Forum, 615 617, pp. 231-234. (2009)

• On diamond surface properties and interactions with neurons

  P. Ariano, O. Budnyk, S. Dalmazzo, D. Lovisolo, Ch. Manfredotti, P. Rivolo, E. Vittone

  European Physical Journal E, Vol. 30, Nr. 2, pp.149-156, ISSN: 1292-8941

• Doubly resonant porous silicon microcavities for enhanced detection of fluorescent organic molecules

  B. Sciacca; F. Frascella; A. Venturello; P. Rivolo; E. Descrovi; F. Giorgis; F. Geobaldo

  Sensors & Actuators: B, CHEMICAL, Vol. 137, pp. 467-470, ISSN: 0925-4005

• SERS-active substrates based on silvered porous silicon

  F. Giorgis, A. Virga, E. Descrovi, A. Chiodoni, P. Rivolo, A. Venturello, F. Geobaldo

  Physica Status Solidi (c), Vol. 6, pp. 1736-1739 - ISSN: 1610-1642

• Demonstration of diffraction enhancement via Bloch surface waves in a-SiN:H multilayers

  M. Liscidini; M. Galli; M. Patrini; R. Loo; C. Goh; Ricciardi C.; F. Giorgis; J.E. Sipe

  APPLIED PHYSICS LETTERS, vol. 94, 043117-043120

• 2008

• Silicon microcantilevers with different actuation-readout schemes for absolute pressure measurement

  S. Bianco, M. Cocuzza, I. Ferrante, E. Giuri, C. F. Pirri, A. Ricci, L. Scaltrito, D. Bich, A. Merialdo, P. Schina, R. Correale

  Journal of Physics: Conference Series 100 (2008), 092008

• Silicon laterally resonant microcantilevers for absolute pressure measurement with integrated actuation and readout

  M. Cocuzza, R. Correale, P. Schina, A. Merialdo, D. Bich, L. Scaltrito, E. Giuri, A. Ricci, I. Ferrante

  J. Vac. Sci. Technol. B 26(2), Mar/Apr 2008, pp.541-550

• Evaluation of different PDMS interconnection solutions for silicon, pyrex and COC microfluidic chips

  G. Canavese, E. Giuri, S.L. Marasso, D. Perrone, M. Quaglio, M. Cocuzza, C.F. Pirri

  J. Micromech. Microeng., 18 (2008) 055012

• APEX protocol implementation on a Lab-on-a-chip for SNPs detection

  S. Marasso, G. Canavese, S. Lobartolo, M. Cocuzza, A. Ferrarini, E. Giuri, D. Perrone, M. Quaglio, A. Ricci, I. Vallini

  Microelectronics Engineering, 85 (2008), 1326-1329 (doi:10.1016/j.mee.2007.12.024)

• The origin of adsorption-induced surface stresses in alkanethiolate-Au assembled monolayers

  V. Scrinivasan, G. Cicero, J. C. Grossman

  Phys. Rev. Lett. 101, 185504 (2008)

• Water confined in nanotubes and between graphene sheets: a first principle study

  G. Cicero, J. C. Grossman, E. Schwegler, F. Gygi and G. Galli

  J. Am. Chem. Soc. 139, 1871 (2008)

• Influence of inhomogeneous contact in electrical properties of 4H-SiC based Schottky diode

  Ben Karoui, M., Gharbi, R., Alzaied, N., Fathallah, M., Tresso, E., Scaltrito, L., Ferrero, S.

  Solid-State Electronics, 52 (8), pp. 1232-1236. (2008)

• Effect of defects on electrical properties of 4H-SiC Schottky diodes

  Ben Karoui, M., Gharbi, R., Alzaied, N., Fathallah, M., Tresso, E., Scaltrito, L., Ferrero, S.

  Materials Science and Engineering C, 28 (5-6), pp. 799-804. (2008)

• A biofunctional polymeric coating for microcantilever molecular recognition

  G. Oliviero, P. Bergese, G. Canavese, M. Chiari, P. Colombi, M. Cretich, F. Damin, S. Fiorilli, S. L. Marasso, C. Ricciardi, P. Rivolo, L. E. Depero

  Analytica Chimica Acta, Vol. 630, Nr.2, pp.161-167 - ISSN: 0003-2670

• Vapour-phase self-assembled monolayers of aminosilane on silicon substrates

  S. Fiorilli, P. Rivolo, E. Descrovi, C. Ricciardi, L. Pasquardini, L. Lunelli, L. Vanzetti, C. Pederzolli, B. Onida, E. Garrone

  Journal of Colloid and Interface Science, Vol. 321, pp. 235-241 - ISSN: 0021-9797

• SiNx/a-SiCx:H passivation layers for p- and n-type crystalline silicon wafers

  U. Coscia, G. Ambrosone, P. Rava, P. Rivolo, F. Ferrazza, L. Serenelli, S. De Iuliis, M. Tucci

  Thin Solid Films, Vol. 516, pp. 1569–1573 - ISSN: 0040-6090

• Low temperature growth of thin film coatings for the surface modification of dental prostheses

  Mandracci P.; Mussano F; Ricciardi C; Ceruti P; Pirri F; Carossa S

  SURFACE & COATINGS TECHNOLOGY, vol. 202, pp. 2477-2481

• Poly(ethylene glycol) Monolayer Formation and Stability on Gold and Silicon Nitride Substrates

  M. Cerruti; S. Fissolo; C. Carraro; Ricciardi C.; A. Majumdar; R. Maboudian

  LANGMUIR, vol. 24, pp. 10646-10653

• 2007

• Polymeric mask protection for alternative KOH silicon wet etching

  G. Canavese, S.L. Marasso, M. Quaglio, M. Cocuzza, C. Ricciardi, C.F. Pirri

  J. Micromech. Microeng., 17 (2007) pp.1387-1393

• Single functional group interactions with individual carbon nanotubes

  R. W. Friddle, M. C. LeMieux, G. Cicero, A. B. Artyukhin, V. V. Tsukruk, J. C. Grossman, G. Galli and A. Noy

  Nature Nanotech. 2, 692 (2007)

• Study of the oxidative half-reaction catalyzed by a non-heme ferrous catalytic center by means of structural and computational methodologies

  G. Cicero, C. Carbonera, K. Valegard, J. Hajdu, I. Andersson and G. Ranghino

  Int. J. of Quantum Chem. 107, 1514 (2007)

• Polarization properties of (1-100) and (11-20) SiC surfaces from first principles

  G. P. Brandino, G. Cicero, B. Bonferroni, A. Ferretti, A. Calzolari, C. M. Bertoni, A. Catellani

  Phys. Rev. B 76, 085322 (2007)

• Modification of cubic SiC surfaces: from gas adsorption to organic functionalization

  G. Cicero and A. Catellani

  J. Phys. D: Appl. Phys. 40, 6215 (2007)

• Low temperature electric transport properties in hydrogenated microcrystalline silicon films

  Ambrosone, G., Coscia, U., Cassinese, A., Barra, M., Restello, S., Rigato, V., Ferrero, S.

  Thin Solid Films, 515 (19 SPEC. ISS.), pp. 7629-7633.

• Band-edge and cavity second harmonic conversion in doubly resonant microcavity

  S. Gesuele; S. Lettieri; P. Maddalena; M. Liscidini; L.C. Andreani; Ricciardi C.; V. Ballerini; F. Giorgis

  JOURNAL OF PHYSICS. B, ATOMIC MOLECULAR AND OPTICAL PHYSICS, vol. 40, pp. 727-734

• Field localization and enhanced second-harmonic generation in silicon-based microcavities

  E. Descrovi; Ricciardi C.; F. Giorgis; G. Lrondel; S. Blaize; R. Bachelot; P. Royer; S. Lettieri; F. Gesuele; P. Maddalena; C.X. Pang; M. Liscidini

  OPTICS EXPRESS, vol. 15, pp. 4159-4167

• Macroscopic growth of carbon nanotube mats and their mechanical properties

  S. Musso; S. Porro; M. Giorcelli; A. Chiodoni; C. Ricciardi; A. Tagliaferro

  CARBON, vol. 45 n. 5, pp. 1133-1136

• Second harmonic generation analysis in hydrogenated amorphous silicon nitride thin films

  S. Lettieri; F. Merola; P. Maddalena; C. Ricciardi; Giorgis F.

  APPLIED PHYSICS LETTERS, vol. 90, 21919

• Silicon-carbon-oxynitrides grown by plasma-enhanced chemical vapor deposition technique

  Mandracci P.; Ricciardi C

  THIN SOLID FILMS, vol. 515, pp. 7639-7642

• 2006

• Silicon resonant microcantilevers for absolute pressure measurement

  S. Bianco, M. Cocuzza, R. Correale, P. Schina, A. Merialdo, D. Bich, L. Scaltrito, C.F. Pirri, G. Piacenza, E. Giuri, S. Ferrero

  Journal of Vacuum Science and Technology B, 24(4), Jul/Aug 2006, pp. 1803-1809

• Fabrication of quartz diaphragms for helium leak detection

  M. Cocuzza, L. Scaltrito, S. Guastella, L. Giovanola, S. Vittozzi, R. Carboneri

  Vacuum Vol. 80/5 (2006) pp. 432-437

• Wetting behavior of low-index cubic SiC Surfaces

  A. Catellani, G. Cicero and G. Galli

  J. Chem. Phys. 124, 024707 (2006)

• Adhesion of single functional groups to individual carbon nanotubes: electronic effects probed by ab initio calculations

  G. Cicero, J. C. Grossman and G. Galli

  Phys. Rev. B 74, 035425 (2006)

• SNOM investigation of surface morphology changes during Cr/Au contact fabrication on single-crystal CVD diamond

  Doneddu, D., Guy, O.J., Baylis, R.M., Chen, L., Dunstan, P.R., Mawby, P.A., Pirri, C.F., Ferrero, S., Twitchen, D., Tajani, A., Schwitters, M.

  Materials Science Forum, 527-529 (PART 2), pp. 1587-1590.

• Microcrystalline silicon-carbon films deposited by silane-methane mixture highly diluted in hydrogen

  Coscia, U., Ambrosone, G., Lettieri, S., Maddalena, P., Ferrero, S.

  Thin Solid Films, 511-512, pp. 399-403.

• In situ etch treatments of silicon carbide epitaxial layer for morphological quality improvement of the surfaces

  De Angelis, S., Perrone, D., Scaltrito, L., Ferrero, S., Pirri, C.F., Mauceri, M., Leone, S., Pistone, G., Abbondanza, G., Crippa, D.

  Physica Status Solidi (A) Applications and Materials Science, 203 (9), pp. 2294-2297.

• Silicon-carbon films deposited at low substrate temperature

  Ambrosone, G., Coscia, U., Lettieri, S., Maddalena, P., Noce, M.D., Ferrero, S., Restello, S., Rigato, V., Tucci, M.

  Journal of Non-Crystalline Solids, 352 (9-20 SPEC. ISS.), pp. 1371-1375.

• Structural, optical and electrical properties of helium diluted a-Si1-xCx:H films deposited by PECVD

  Loulou, M., Gharbi, R., Fathallah, M.A., Ambrosone, G., Coscia, U., Abbate, G., Marino, A., Ferrero, S., Tresso, E.

  Journal of Non-Crystalline Solids, 352 (9-20 SPEC. ISS.), pp. 1388-1391.

• Observation of negative capacitance in a-SiC:H/a-Si:H UV photodetectors

  Gharbi, R., Abdelkrim, M., Fathallah, M., Tresso, E., Ferrero, S., Pirri, C.F., Brahim, T.M.

  Solid-State Electronics, 50 (3), pp. 367-371.

• In situ etch treatment of bulk surface for epitaxial layer growth optimization

  Pirri, C.F., Ferrero, S., Scaltrito, L., Perrone, D., De Angelis, S., Mauceri, M., Leone, S., Pistone, G., Abbondanza, G., Crippa, D.

  Microelectronic Engineering, 83 (1 SPEC. ISS.), pp. 82-85.

• Intrinsic 4H-SiC parameters study by temperature behaviour analysis of Schottky diodes

  Pirri, C.F., Ferrero, S., Scaltrito, L., Perrone, D., Guastella, S., Furno, M., Richieri, G., Merlin, L.

  Microelectronic Engineering, 83 (1 SPEC. ISS.), pp. 86-88.

• Amorphous Silicon Nitride: a suitable alloy for optical multilayered structures

  C. Ricciardi; V. Ballarini; M. Galli; M. Liscidini; L.C. Andreani; M. Losurdo; G. Bruno; S. Lettieri; F. Gesuele; P. Maddalena; Giorgis F.

  JOURNAL OF NON-CRYSTALLINE SOLIDS, vol. 352, pp. 1294-1297

• Improvement of titanium film absorption with antireflection coatings

  E. Taralli; C. Portesi; Ricciardi C.; E. Tresso; M. Rajteri

  NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH. SECTION A, ACCELERATORS, SPECTROMETERS, DETECTORS AND ASSOCIATED EQUIPMENT, vol. 559, pp. 757-759

• Controlled light emission from dye-impregnated porous silicon microcavities

  Venturello A; Ricciardi C; Giorgis F; Strola S; Salvador Gp; Garrone E; Geobaldo F.

  J. Non-Cryst. Solids, 352, 1230–1233

• Microstructure analysis of a-SiC : H thin films grown by high-growth-rate PECVD

  Ricciardi C.; A. Primiceli; G. Germani; A. Rusconi; F. Giorgis

  JOURNAL OF NON-CRYSTALLINE SOLIDS, vol. 352 n. 9-20, pp. 1380-1383

• Optical harmonic generation in amorphous silicon nitride microcavities

  F. Gesuele; S. Lettieri; P. Maddalena; C. Ricciardi; V. Ballarini; Giorgis F.

  JOURNAL OF LUMINESCENCE, vol. 121, pp. 274-277

• Synthesis, characterization and modelling of silicon based opals

  Pallavidino L; Razo Ds; Geobaldo F.; Balestreri A; Bajoni D; Galli M; Andreani Lc; Ricciardi C; Celasco E; Quaglio M; Giorgis F

  J. Non-Cryst. Solids, 352, 1425–1429

• 2005

• Characterization of electrical contacts on polycrystalline 3C-SiC thin films

  A. Castaldini, A. Cavallini, M. Rossi, M. Cocuzza, C. Ricciardi

  Materials Science Forum Vols. 483-485 (2005) pp. 745-748

• First principles simulations of SiC-based interfaces

  A. Catellani, G. Cicero, M. C. Righi, C. A. Pignedoli

  Mat. Sci. Forum 483-485, 541 (2005)

• Water at hydrophilic solid surface probed by ab initio molecular dynamics: inhomogeneous thin layers of dense fluid

  G. Cicero, J. C. Grossman, a. Catellani and G. Galli

  J. of Am. Chem. Soc. 127, 6830 (2005)

• Towards SiC surface functionalization: an ab initio study

  G. Cicero and A. Catellani

  J. Chem. Phys. 122, 214716 (2005)

• Theoretical studies of biotin chemisorption on clean and hydroxilated silicon terminated Si-SiC(001) surfaces

  Y. Kanai, G. Cicero, A. Selloni, R, Car and G. Galli

  J. Phys. Chem B. 109, 13656 (2005)

• Structural and electrical investigation of high temperature annealed As-implanted Si crystal

  C. Bocchi, L. Felisari, A. Catellani, G. Cicero, F. Germini, E. Gombia, R. Mosca, L. Nasi, E. Kh. Mukhammedzanov, M. A. Chuev, M. Camalleri and D. Calì

  J. Vac. Sci. Technol. B 23, 1504 (2005)

• Phase formation at rapid thermal annealing of nickel contacts on C-face n-type 4H-SiC

  Ferrero, S., Albonico, A., Meotto, U.M., Rombolà, G., Porro, S., Giorgis, F., Perrone, D., Scaltrito, L., Bontempi, E., Depero, L.E., Richieri, G., Merlin, L.

  Materials Science Forum, 483-485, pp. 733-736.

• Design, fabrication, and characterization of 1.5 mΩcm2, 800 v 4H-SiC n-type Schottky barrier diodes

  Furno, M., Bonani, F., Ghione, G., Ferrero, S., Porro, S., Mandracci, P., Scaltrito, L., Perrone, D., Richieri, G., Merlin, L.

  Materials Science Forum, 483-485, pp. 941-944.

• Growth, morphological and structural characterization of silicon carbide epilayers for power electronic devices applications

  Pirri, C.F., Porro, S., Ferrero, S., Celasco, E., Guastella, S., Scaltrito, L., Yakimova, R., Syväjärvi, M., Ciechonski, R.R., De Angelis, S., Crippa, D.

  Crystal Research and Technology, 40 (10-11), pp. 964-966.

• Deep levels by proton and electron irradiation in 4H-SiC

  Castaldini, A., Cavallini, A., Rigutti, L., Nava, F., Ferrero, S., Giorgis, F.

  Journal of Applied Physics, 98 (5), art. no. 053706, .

• Characterization of electrical contacts on polycrystalline 3C-SiC thin films

  A. Castaldini; A. Cavallini; M. Rossi; M. Cocuzza; Ricciardi C.

  MATERIALS SCIENCE FORUM, vol. 483-485, pp. 745-748

• Microstructure analysis on polycrystalline 3C-SiC thin films

  Ricciardi C.; F. Giorgis; G. Fanchini; S. Musso; V. Ballarini; E. Bennici; G. Barucca; A.M. Rossi

  DIAMOND AND RELATED MATERIALS, vol. 14, pp. 1134-1137

• Second-harmonic generation in hydrogenated amorphous-Si1−xNx doubly resonant microcavities with periodic dielectric mirrors

  S. Lettieri; F. Gesuele; And P. Maddalena; M. Liscidini And L.C. Andreani; Ricciardi C.; V. Ballarini; F. Giorgis

  APPLIED PHYSICS LETTERS, vol. 87, pp. 19110-19113

• 2004

• Interaction of water molecules with SiC(001) surfaces

  G. Cicero, G. Galli, A. Catellani

  J. Phys. Chem. B 108, 16518 (2004)

• Atomic control of water interaction with biocompatible surfaces: The case of SiC(001)

  G. Cicero, A. Catellani and G. Galli

  Phys. Rev. Lett. 93, 016102/1-4 (2004)

• Structural characterisation of nickel suicide performed by two-dimensional X-ray microdiffraction

  Colombi, P., Bontempi, E., Meotto, U.M., Porro, S., Ricciardi, C., Scaltrito, L., Ferrero, S., Richieri, G., Merlin, L., Depero, L.E.

  Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 114-115 (SPEC. ISS.), pp. 236-240.

• Defect influence on the electrical properties of 4H-SiC Schottky diodes

  Scaltrito, L., Celasco, E., Porro, S., Ferrero, S., Giorgis, F., Pirri, C.F., Perrone, D., Meotto, U., Mandracci, P., Richieri, G., Merlin, L., Cavallini, A., Castaldini, A., Rossi, M.

  Materials Science Forum, 457-460 (II), pp. 1081-1084.

• Vibrational and emission properties of porous 6H-SiC

  Rossi, A.M., Ballarini, V., Ferrero, S., Giorgis, F.

  Materials Science Forum, 457-460 (II), pp. 1475-1478.

• Plasma-assisted SiC oxidation for power device fabrication

  Mandracci, P., Ferrero, S., Porro, S., Ricciardi, C., Richieri, G., Scaltrito, L.

  Applied Surface Science, 238 (1-4 SPEC. ISS.), pp. 336-340.

• Deposition of microcrystalline silicon-carbon alloys in low power regime

  Ambrosone, G., Barucca, G., Coscia, U., Ferrero, S., Lettieri, S., Maddalena, P.

  Journal of Non-Crystalline Solids, 338-340 (1 SPEC. ISS.), pp. 163-167.

• Deposition of microcrystalline silicon-carbon films by PECVD

  Ambrosone, G., Coscia, U., Lettieri, S., Maddalena, P., Minarini, C., Ferrero, S., Patelli, A., Rigato, V.

  Thin Solid Films, 451-452, pp. 274-279.

• Characterization of silicon carbide thin films grown on Si and SiO2/Si substrates

  P. Zanola; E. Bontempi; Ricciardi C.; G. Barucca; L.E. Depero

  MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, vol. 114-115, pp. 279-283

• Plasma-assisted SiC oxidation for power device fabrication

  P. Mandracci; S. Ferrero; S. Porro; Ricciardi C.; G. Richieri; L. Scaltrito

  APPLIED SURFACE SCIENCE, vol. 238, pp. 336-340

• Polycrystalline SiC growth and characterization

  Ricciardi C.; E. Aimo Boot; F. Giorgis; P. Mandracci; U.M. Meotto; G. Barucca

  APPLIED SURFACE SCIENCE, vol. 238, pp. 331-335

• Silicon-based microcavities: theory and experiment

  Ballarini V., Ricciardi C., Giorgis F., Iotti R.C., Rossi F.

  SEMICONDUCTOR SCIENCE AND TECHNOLOGY, vol. 19 n. 4, S489-S491

• Structural characterisation of nickel silicide performed by two-dimensional X-ray microdiffraction

  P. Colombi; E. Bontempi; U.M. Meotto; S. Porro; Ricciardi C.; L. Scaltrito; S. Ferrero; G. Richieri; L. Merlin; L.E. Depero

  MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, vol. 114, pp. 236-240

• 2003

• Correlation between defects and electrical properties of 4H-SiC based Schottky diodes

  L. Scaltrito, S. Porro, M. Cocuzza, F. Giorgis, C.F. Pirri, P. Mandracci, C. Ricciardi, S. Ferrero, C. Sgorlon, G. Richieri, L. Merlin, A. Castaldini, A. Cavallini

  Materials Science Forums 433-436 (2003) 455-458

• Structural and electrical characterization of epitaxial 4H-SiC layers for power electronic device applications

  L. Scaltrito, S. Porro, M. Cocuzza, F. Giorgis, C.F. Pirri, P. Mandracci, C. Ricciardi, S. Ferrero, C. Sgorlon, G. Richieri, L. Merlin, A. Castaldini, A. Cavallini, L. Polenta

  Materials Science and Engineering B102 (2003) 298-303

• Surface analysis and defect characterization of 4H-SiC wafers for power electronic device applications

  L. Scaltrito, G. Fanchini, M.Cocuzza, F. Giorgis, C.F. Pirri, P. Mandracci, C. Ricciardi, S. Ferrero, C. Sgorlon, G. Richieri, L. Merlin

  Diamond and related materials 12 (2003) 1224-1226

• Characterization of polycrystalline SiC layers grown by ECR-PECVD for micro-electro-mechanical systems

  C. Ricciardi, E. Bennici, M. Cocuzza, P. Mandracci, D. Bich, V. Guglielmetti, G. Barucca

  Thin Solid Films 427 (2003) 187-190

• Theoretical investigation of highly mismatched interface: the case of SiC/Si(001)

  Theoretical investigation of highly mismatched interface: the case of SiC/Si(001)

  Phys. Rev. B 68, 195302 (2003)

• First principles simulations of extended defects at cubic SiC surfaces and interfaces

  A. Catellani, G. Cicero, G. Galli, L. Pizzagalli

  Solid State Phenomena 95-96, 415 (2003)

• Properties of a-SiC:H films deposited in high power regime

  Ambrosone, G., Ballarini, V., Coscia, U., Ferrero, S., Giorgis, F., Maddalena, P., Patelli, A., Rava, P., Rigato, V.

  Thin Solid Films, 427 (1-2), pp. 279-283.

• Low temperature growth of SiO2 on SiC by plasma enhanced chemical vapor deposition for power device applications

  Mandracci, P., Ferrero, S., Ricciardi, C., Scaltrito, L., Richieri, G., Sgorlon, C.

  Thin Solid Films, 427 (1-2), pp. 142-146.

• a-Si:H based two-dimensional photonic crystals

  Bennici, E., Ferrero, S., Giorgis, F., Pirri, C.F., Rizzoli, R., Schina, P., Businaro, L., Di Fabrizio, E.

  Physica E: Low-Dimensional Systems and Nanostructures, 16 (3-4), pp. 539-543.

• New insights on amorphous silicon-nitride microcavities

  V. Ballarini; G. Barucca; E. Bennici; C.F. Pirri; Ricciardi C.; E. Tresso; F. Giorgis

  PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, vol. 16, pp. 591-595

• Physical properties of ECR-CVD polycrystalline SiC films for Micro-Electro-Mechanical systems

  Ricciardi C.; G. Fanchini; P. Mandracci

  DIAMOND AND RELATED MATERIALS, vol. 12, pp. 1236-1240

• 2002

• Ab initio study of misfit dislocations at the SiC/Si(001) interface

  G. Cicero, L. Pizzagalli and A. Catellani

  Phys. Rev. Lett. 89, 156101-1/4 (2002)

• A Molecular Dynamics Study of the beta-SiC/Si(001) interface

  G. Cicero, L. Pizzagalli and A. Catellani

  Journal of Physics: Cond. Matt. 14, 13031 (2002)

• Defect characterization of 4H-SiC wafers for power electronic device applications

  Ferrero, S., Porro, S., Giorgis, F., Pirri, C.F., Mandracci, P., Ricciardi, C., Scaltrito, L., Sgorlon, C., Richieri, G., Merlin, L.

  Journal of Physics Condensed Matter, 14 (48), pp. 13397-13402.

• Structural, optical and electrical properties of μc-Si:H deposited by ECR

  Mars, M., Fathallah, M., Tresso, E., Ferrero, S.

  Journal of Non-Crystalline Solids, 299-302 (PART 1), pp. 133-136.

• Luminescence properties of amorphous silicon-nitride-based optical microcavities

  Giorgis, F., Ballarini, V., Ferrero, S., Mandracci, P., Ricciardi, C., Pirri, C.F.

  Journal of Non-Crystalline Solids, 299-302 (PART 1), pp. 653-657.

• Hydrogenated amorphous silicon carbon alloys for solar cells

  Ambrosone, G., Coscia, U., Lettieri, S., Maddalena, P., Privato, C., Ferrero, S.

  Thin Solid Films, 403-404, pp. 349-353.

• Structural and optical properties of hydrogenated amorphous silicon-carbon alloys grown by plasma-enhanced chemical vapour deposition at various rf powers

  Ambrosone, G., Coscia, U., Ferrero, S., Giorgis, F., Mandracci, P., Pirri, C.F.

  Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties, 82 (1), pp. 35-46.

• 2001

• First principles study of the initial stages of SiC growth on Si(001)

  G. Cicero and Catellani

  Appl. Phys. Lett. 28, 2312 (2001)

• C adsorption and diffusion at the Si(001) surface: implication for SiC growth

  G. Cicero and A. Catellani

  Appl. Surf. Sci. 184, 113 (2001)

• Large area microcrystalline silicon films grown by ECR-CVD

  S. Ferrero, P. Mandracci, G. Cicero, F. Giorgis, C. F. Pirri and G. Barucca

  Thin Solid Films 383, 181 (2001)

• Growth and characterization of SiC layers obtained by microwave-CVD

  P. Mandracci, S. Ferrero., G. Cicero, F. Giorgis, C. F. Pirri, G. Barucca, R. Reitano, P. Musumeci, L. Calcagno and G. Foti

  Thin Solid Films 383, 169 (2001)

• Optical and structural properties of SiC layers grown by an electron cyclotron resonance CVD technique

  F. Giorgis, a. Chiodoni, G. Cicero, S. Ferrero, P. Mandracci, G. Barucca, R. Reitano and P. Musumeci

  Diamond and Related Materials 10, 1264 (2001)

• Heteroepitaxy of 3C-SiC by electron cyclotron resonance-CVD technique

  P. Mandracci, A. Chiodoni, G. Cicero, S. Ferrero, F. Giorgis, C. F. Pirri, G. Barucca, P. Musumeci and R. Reitano

  Appl. Surf. Sci. 184, 43 (2001)

• Structural and optical properties of a-Si1-xCx:H grown by plasma enhanced CVD

  Giorgis, F., Ambrosone, G., Coscia, U., Ferrero, S., Mandracci, P., Pirri, C.F.

  Applied Surface Science, 184 (1-4), pp. 204-208.

• Study of the optical properties and the density-of-states distribution of hydrogenated amorphous silicon-nitrogen alloy

  Mars, M., Abdelkarim, M., Fathallah, M., Tresso, E., Ferrero, S.

  Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties, 81 (12), pp. 1951-1962.

• Modified spontaneous emission in amorphous silicon-nitride based optical microcavities

  Giorgis, F., Ferrero, S., Mandracci, P., Pirri, C.F., Cazzanelli, M., Pavesi, L.

  Materials Research Society Symposium - Proceedings, 637, pp. E271-E276.

• CVD diamond microdosimeters

  C. Manfredotti; A. Lo Giudice; Ricciardi C.; C. Paolini; E. Massa; F. Fizzotti; E. Vittone

  NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH. SECTION A, ACCELERATORS, SPECTROMETERS, DETECTORS AND ASSOCIATED EQUIPMENT, vol. 458, pp. 360-364

• Micro-IBICC and micro-IL analyses of CVD diamond microdosimeters

  E. Vittone; Ricciardi C.; A. Lo Giudice; F. Fizzotti; C. Manfredotti; G. Egeni; V. Budello

  NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH. SECTION B, BEAM INTERACTIONS WITH MATERIALS AND ATOMS, vol. 181, pp. 349-353

Proceedings

• 2019

• Spectrophotometric monitoring system, integrated in an autonomous underwater vehicle, for continuous

  Periolatto, M., Catania, F., Pirri, F., Scaltrito, L.,

  Offshore Mediterranean Conference and Exhibition 2019, OMC 2019

• Design and characterization of microfluidic devices for water/oil separation

  Quaglio, M., Frascella, F., Marasso, S.L., Cocuzza, M., Viberti, D., Amendola, A., Carminati, S., Fabrizio Pirri, C.

  Offshore Mediterranean Conference and Exhibition 2019, OMC 2019

• P3HT Processing Study for In-Liquid EGOFET Biosensors: Effects of the Solvent and the Surface

  c 1. M. Parmeggiani, A. Verna, A. Ballesio, M. Cocuzza, E. Piatti, V. Fra, C.F. Pirri, S.L. Marasso

  Proceedings 2019, Vol. 15 (1), 39, doi: 10.3390/proceedings2019015039

• Broadband Dielectric Transmitarray with Scanning Capabilities

  c 4. A. Massaccesi, P. Pirinoli, V. Bertana, G. Scordo, S.L. Marasso, M. Cocuzza, G. Dassano

  IEEE 2019 13th European Conference on Antennas and Propagation (EuCAP)

• 2018

• Optical properties of spin-coated SnS2 thin films

  Orletskyi, I.G., Solovan, M.M., Maryanchuk, P.D., Maistruk, E.V., Pinna, F., Tresso, E., Brus, V.V.

  (2018) Proceedings of SPIE - The International Society for Optical Engineering, 10612, art. no. 106120P

• Nanomolar detection of the antitumor drug tamoxifen by flexible organic electrochemical devices

  P. D’Angelo, G. Tarabella, A. Romeo, S.L. Marasso, M. Cocuzza, C. Peruzzi, D. Vurro, G. Carotenuto and S. Iannotta

  AIP Conference Proceedings 1990, 020015, (2018), https://doi.org/10.1063/1.5047769

• Enhancement of Spontaneous Emission Decay Rate in Photonic Nano-Cavities Based on Bloch Surface Waves

  U Stella, A Angelini, F Frascella, N De Leo, L Boarino, E Descrovi

  International Conference on Optical MEMS and Nanophotonics, 2018, Article number 845453223rd, DOI: 10.1109/OMN.2018.8454532

• Cr(VI) in Water: Continuous, on Site Spectrophotometric Determination - Laboratory test preliminary to microfluidic device prototyping

  F. Catania, A. Piscitelli, S. Ferrero, M. Cocuzza, C.F. Pirri, L. Scaltrito, M. Periolatto

  Proc. of the Sixth Intl. Conf. Advances in Bio-Informatics, Bio-Technology and Environmental Engineering - ABBE 2018, ISBN: 978-1-63248-148-1, doi:10.15224/978-1-63248-148-1-01

• 2017

• Light-driven liquid microlenses

  Angelini, A., Pirani, F., Frascella, F., Ricciardi, S., Descrovi, E.

  (2017) Proceedings of SPIE - The International Society for Optical Engineering, 10106, art. no. 1010612

• Tunable hydrophobicity assisted by light-responsive surface micro-structures

  Pirani, F., Angelini, A., Ricciardi, S., Frascella, F., Rizzo, R., Lupi, F.F., De Leo, N., Boarino, L., Descrovi, E.

  (2017) Proceedings of SPIE - The International Society for Optical Engineering, 10092, art. no. 100920A

• 2016

• Light-driven reversible shaping of 2D polymeric lattices

  Pirani, F., Angelini, A., Frascella, F., Rizzo, R., Descrovi, E.

  (2016) 2016 Conference on Lasers and Electro-Optics, CLEO 2016, art. no. 7788991

• Synthesis of ZnO nanowires on microcantilever arrays for high sensitivity biosensors

  Stassi, S., Chiadò, A., Cauda, V., Canavese, G., Laurenti, M., Ricciardi, C.

  (2016) 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2016, pp. 1186-1187

• 2015

• Phase-sentitive bloch surface wave biosensors

  Sinibaldi, A., Anopchenko, A., Rizzo, R., Michelotti, F., Danz, N., Munzert, P., Rivolo, P., Ricciardi, S., Frascella, F.

  (2015) Proceedings of the 2015 18th AISEM Annual Conference, AISEM 2015, art. no. 7066790

• Nanostructured photoelectrodes and polymeric nanointerfaces engineering: The critical transition from rigid to flexible dye-sensitized solar cells

  Bella, F., Lamberti, A., Nair, J.R., Bianco, S., Gerbaldi, C., Tresso, E., Pirri, C.F.

  (2015) IEEE-NANO 2015 - 15th International Conference on Nanotechnology, art. no. 7388893, pp. 1378-1381

• Low-cost wearable measurement system for continuous real-time pedobarography

  Corbellini, S., Ramella, C., Fallauto, C., Pirola, M., Stassi, S., Canavese, G.

  (2015) 2015 IEEE International Symposium on Medical Measurements and Applications, MeMeA 2015 - Proceedings, art. no. 7145281, pp. 639-644

• Polymer coated ZnO nanowires for memristive devices

  Jasmin, A., Porro, S., Chiolerio, A., Pirri, C.F., Ricciardi, C.

  (2015) IEEE-NANO 2015 - 15th International Conference on Nanotechnology, art. no. 7388647, pp. 496-498

• NUMEN project : Challenges in the investigation of double charge-exchange nuclear reactions, towards neutrino-less double beta decay

  Agodi, C., Cappuzzello, F., Balestra, F., Bijker, R., Bonanno, D., Bongiovanni, D., Branchina, V., Calabretta, L., Calanna, A., Calvo, D., Carbone, D., Cavallaro, M., Colonna, M., Deshmukh, N., Ferrero, S., Foti, A., Finocchiaro, P., Giraudo, G., Greco, V

  (2015) Proceedings of the 14th International Conference on Nuclear Reaction Mechanisms, NRM 2015, pp. 249-252

• 2013

• Structural and electrical characterization of the 4H-SiC based junction field effect transistor (JFET)

  Shili, K., Ben Karoui, M., Gharbi, R., Ferrero, S.

  2013 International Conference on Electrical Engineering and Software Applications, ICEESA 2013, art. no. 6578475, .

• 2012

• Different scale confinements of PVDF-TrFE as functional material of piezoelectric sensor devices

  G. Canavese, S. Stassi, V. Cauda, A. Verna, A. Chiodoni, S. Marasso, M. Cocuzza

  2012 IEEE SENSORS PROCEEDINGS, Pages 962-965, ISSN: 1930-0395, ISBN: 978-1-4577-1766-6

• A Tactile Sensor Device Exploiting the Tunable Sensitivity of Copper-PDMS Piezoresistive Composite

  S. Stassi, G. Canavese, F. Cosiansi, R. Gazia, M. Cocuzza

  Procedia Engineering, 47, 2012, Pages 659-663, ISSN 1877-7058, 10.1016/j.proeng.2012.09.233

• Dynamic behavior of Ti/4H-SiC Schottky diodes

  Shili, K., Ben Karoui, M., Gharbi, R., Abdelkrim, M., Fathallah, M., Ferrero, S.

  (2012) Proceedings of the Mediterranean Electrotechnical Conference - MELECON, art. no. 6196509, pp. 626-629.

• 2011

• Is the oil industry ready for nanotechnologies ?

  M. Cocuzza, C. F. Pirri, V. Rocca, F. Verga

  Proceedings of the 10th Offshore Mediterranean Conference (OMC), Ravenna (Italy), March 23-25, 2011

• 2010

• Electrical characterization of self-aligned titanium silicide SBDs formed by furnace annealing

  Barbarini, E., Ferrero, S., Pirri, C.F.

  2010 IEEE International Conference of Electron Devices and Solid-State Circuits, EDSSC 2010, art. no. 5713677, .

• Fabrication of micro-structures on nickel alloy by DPSS laser ablation technique for lab-on-chip applications

  Chen, Q., Chen, Q., MacCioni, G., Ferrero, S., Scaltrito, L., Sacco, A.

  Proceedings of SPIE - The International Society for Optical Engineering, 7762, art. no. 776239, . (2010)

• 2008

• Electromigration feedback controlled Nanogaps fabrication based on MPTMS adhesion layer

  P. Civera, G. Piccinini, D. Demarchi, M. Cocuzza, D. Perrone

  Proceedings - IEEE International Workshop on Design and Test of Nano Devices, Circuits and Systems (NDCS 2008). Boston, Massachusetts, USA. 29-30 September 2008. (pp. 11-14). ISBN/ISSN: 978-0-7695-3379-7. doi: 10.1109/NDCS.2008.12LOS ALAMITOS, CA: IEEE Co

• 2007

• Electrical properties of 4H-SiC based Schottky diode

  Ben Karoui, M., Gharbi, R., Alzaied, N., Fathallah, M., Tresso, E., Scaltrito, L., Ferrero, S.

  MIPRO 2007 - 30th Jubilee International Convention Proceedings: Microelectronics, Electronics and Electronic Technologies, Hypermedia and Grid Systems, MEE /HGS, 1, pp. 67-71.

• 2006

• Silicon micro machining technologies and advanced materials (porous silicon and PEEK-WC) for realization of micro-PEM fuel cells

  Tresso, E., Borello, L., Drioli, E., Gianolio, G., Guastella, S., Perrone, D., Quaglio, M., Rossi, A.M., Rosso, I., Scaltrito, L., Trotta, F.

  Materials Research Society Symposium Proceedings, 885, pp. 15-20.

• 2005

• AMORPHOUS THIN FILMS GROWN BY PLASMA TECHNIQUES FOR BIOLOGICAL ANALYSIS

  M. Cocuzza, S.Bianco, S. Ferrero, E. Giuri, C.F. Pirri, A. Ricci, G. Piacenza, M. Perucca, D. Bich, P. Schina, A. Merialdo

  PROCEEDINGS OF THE 17TH International Symposium on Plasma Chemistry , Toronto , Aug 2005

• 2004

• Characterization of polycrystalline 3C(B)-SiC thin films for MEMS and pressure sensors application

  A. Cavallini, M. Rossi, M. Cocuzza, C. Ricciardi

  ASDAM 2004 - Conference Proceedings, 5th International Conference on Semiconductor Devices and Microsystems, Smolenics Castle, Slovakia, 17 October 2004 - 21 October 2004, pp. 25-28, ISBN: 0780385357;978-078038535-1

• A combined HREM and theoretical analysis of SiC/Si interfaces

  V. Grillo, S. Frabboni, G. Cicero, G. Savini, A. Catellani

  Institute of Physics 2004, pp. 69-72, Bristol, UK

• 2001

• Structural properties of 3C-SiC layers grown on Si substrates by Electron Cyclotron Resonance CVD technique

  F. Giorgis, A. Chiodoni, G. Cicero, S. Ferrero, P. Mandracci, C. F. Pirri, G. Barucca, L. Calcagno, G. Foti, P. Musumeci and R. Reitano

  Mat. Res. Soc. Symp. Proc. 640 (2001) H 5.9.1.

Patents

• 2013

• PIPELINE INSPECTION APPARATUS FOR THE INTERNAL INSPECTION OF PIPELINES

  Eni S.p.A. (Inventors: A. Di Lullo, M. Pirola, L. Scaltrito, J.M. Tulliani)

  WO2013102807 (A3), 24/10/2013

• 2010

• DISPOSITIVI MICROFLUIDICI PER APPLICAZIONE IN CAMPO BIOMEDICALE, FABBRICATI IN MATERIALE POLIMERICO COMPOSITO (“Microfluidic devices for application in the biomedical field, made of composite polymeric materials”)

  Polytechnic of Turin and CNR-INFM

  n. TO2010A000196

• PURIFICAZIONE ED AMPLIFICAZIONE DI ACIDI NUCLEICI IN UN DISPOSITIVO MICROFLUIDICO COMPRENDENTE SUPERFICI DI POLIDIMETILSILOSSANO (“Nucleic Acids purification and amplification in a microfluidic device with PDMS surfaces”)

  Polytechnic of Turin, Bruno Kessler Foundation and Matteo Cocuzza

  n. TO2010A000865

• 2009

• SISTEMA A VENTOSA PER SIGILLATURA REVERSIBILE DI DISPOSITIVI MICROFLUIDICI POLIMERICI ELASTOMERICI (“Suction cap system for the reversible sealing of elastomeric microfluidic devices”)

  Polytechnic of Turin and CNR-INFM

  n. TO2009A000735

• DISPOSITIVO MICROFLUIDICO, PARTICOLARMENTE PER LA RIVELAZIONE DI VARIANTI GENICHE (“Microfluidic device, namely for the detection of genetic mutations”)

  Polytechnic of Turin, CNR-INFM, University of Trieste, Biodiversity S.p.A.

  n. TO2009A000915